Recent content by Pikerbu

my Del ozone eclipse 1 blue tube connector (to the manifold) finally broke off after 5 years and it is sucking air into my pump. I am thinking of capping the black manifold and call it the day. Anyone know what size is the cap (the white cap connecting to the black tube in the picture)?

Do you think I could use some epoxy to patch the leak? I tried some outdoor sealant I think rated at 300psi and that wasn't effective. The epoxy I saw in Lowes has a psi rating of 3000.

Hello, I have a del ozone system and the black pipe where the ozone feed to the pool water is leaking at the joint with the PVC pipe (see attached photo). I have put some outdoor sealant to try to patch it up but it is not working. I got a $500 quote to repair the leak (replacing the black...

Hello, I have a jandy one speed speed pump that run the water fall features and a jandy variable speed pump that runs the filtration system. Currently, due to temperature in my area is lower than 32f. Both pumps have been running not stop (freeze protect). Just Want to get you guys thought on...

Thanks guys. I have the speedstir. The extended directions help quite a bit... Thanks again Hean

Thanks. The only reason I am using the hth test is about a month ago I got my tf100 testkit the ch number was more like 410- 440. Over the course of 4-5 weeks the numbers went up to 600+. Been using hth for about 6 months it has been going up from 350-400. Perhaps I was using the tf100 ch test...

Hello, Want to ask for your advice about my high calcium situation. My numbers are FC: 2 Cc: 0 Ph:7.6-7.8 Ta: 70 Cya: 20 Ch (tf100): 640. Hth from Walmart : 420 Fill water ch (tf100): 150; hth:120 Water condition: crystal clean As you can see, the 2 different test kits show 2 different...

thanks Dave. I found both parts on Amazon...seems like it might work. will try http://www.amazon.com/gp/product/B008FM ... PDKIKX0DER http://www.amazon.com/gp/product/B008FM ... PDKIKX0DER thanks Hean

Thanks all for advice. Day 2 seems to be going well. Have to dial up a bit.... Another question. I am thinking of putting back my vacless SVRS to the Drain plug but thru a tee with the LQ. (Really afraid drilling a hole in my pipe). I found this tee from usplastic...

Installed LQ today. I used pump drain plug and took out the vacless device out. It is working great. One I thing I noticed if my flow meter set at max ie 5, there is no bubble and beautiful but when I set it at 1 or 2, very tiny bubbles appear all along the suction tube after 10 mins or so. The...

No they didn't... I am going to try on the side of the main pile to the pump. Still waiting for my lq to arrive but have all the supplies ready to go. Will let you know if I ran into any issue...thanks again for the help. Hean