Recent content by PhotoEd

  1. P

    Vacuum Pump and Light not working - Goldline Auquarite

    It is not GFCI. It's in the controller.
  2. P

    Vacuum Pump and Light not working - Goldline Auquarite

    Hey gang, I realized the other day that my vacuum pump was not coming on when the timer told her to. Manually turning on the pump did no good. You can hear the relay kick in and out. Read out looks normal for all systems. There was lightning in the area the day I realized the pump was not...
  3. P

    Air Temp = 197 degrees F?

    Hoping to look into it today, thanks for checking! :cheers:
  4. P

    Air Temp = 197 degrees F?

    Yep! That's the one! On line supplier? I'll check with ohm meter before buying.
  5. P

    Air Temp = 197 degrees F?

    I inspected the full length of wire and it looks unharmed. How does one spec. out a new sensor, or are they all the same? :cheers:
  6. P

    Air Temp = 197 degrees F?

    Interesting. What next?
  7. P

    Air Temp = 197 degrees F?

    Could you explain further? What I did proved that the air sensor is bad, no?
  8. P

    Air Temp = 197 degrees F?

    So I did the swap yesterday... Before the swap: Air = 197F Water = 72F After the swap: Air = 68F Water = -11F Here are some interesting observations: Both sensors use red/black wires. One sensor was arranged with red on top, the other black (Possitive/Negative neutral?). And here's the...
  9. P

    Air Temp = 197 degrees F?

    Copy. Thanks! :goodjob:
  10. P

    Air Temp = 197 degrees F?

    Goldline system, air temp sensor either reads, "Short" or most of the time a reading near 200 degrees. Looking at where the sensor connects to the board, I see no short. Water temp sensor is accurate. How do I troubleshoot? :cheers:
  11. P

    Replace temp cell sensor w/o replacing the entire Turbo cell?

    Re: Replace temp cell sensor w/o replacing the entire Turbo Curious if anyone has a comment on this?
  12. P

    I'm thinking she's about to turn green on me

    Jason, if that is the case, it's the first time it's happened in the 3 years I have owned the pool. I have 2 decades of pool chemistry experience, but maybe the 4th of July just put too much pressure on my chemistry. I'll treat it as if the SWG is working and continue to treat it as an algae...
  13. P

    I'm thinking she's about to turn green on me

    Here's the data: Temp:85F Cell Voltage:-25.30v Cell Current:-6.64 Cell Turned Off: All values go to 0 Output:25% Salinity:2900 Software Revision Level:4.10 Display Revision:3.12 Product Name:Aqua Plus CYA:50 TA:80 pH:7.2
  14. P

    I'm thinking she's about to turn green on me

    Not trying to thread-jack, but having a similar issue. Topic split. If there is the slightest chance that you might be hijacking, simply start a new topic. JasonLion Looking at my pool yesterday, I'm thinking she's about to turn green on me. Quick check confirms there is NO chlorine in my...