Recent content by Perfo

Thanks.. I shall go hunting.

Chlorine generator still working without a problem. So swapping the connection over and or moving the socket did it... I can't find a taylor K-2006-c here in the UK.. I've been looking for a few weeks now. When I couldn't afford one I found it no problem. There are some K-2006 's though so...

Well three day son and it's still going ... I'm guessing there must be a bad connection in the cell head somewhere and moving the plug around has altered it. If (when) it goes again I'll get in to the contacts and see what's going on. Putting 2 liters of bleach in the pool every day and now...

Sure will....

Don't you have to add zinc or something to stop copper stains ? If anyone on here had luck with swapping the plug over on the cell and or changing the power socket. Could you give an update and let me know if it worked for a day or was back to fully functional. I have the same problem and doing...

I'm working 12 hours shifts at them moment so not getting much time to fiddle with my Pool. So after deciding yesterday that my SWCG had a problem I did a few searches on this forum and found out some handy hints. So yesterday if I started the SWCG it would think about it for up to a minute...

What would be handy would be a set of figures for these cells. It's relatively easy to put 12Vdc on them and measure the current so that would be a great help for folks like me with a problem I could then either discount the cell or know I've got something wrong with it with a simple test...

I've just had one of them thoughts that make you smack upside your head... SWCG is definitely faulty... and it doesn't matter what the salt level is. It was working fine when I went away for a few weeks. During this time it didn't rain and no one used the pool. So even if the salt level had...

That's my Mo as well keep it a simple as possible. I set the thing up a few years ago added the salt I should to start it , pressed the button and it's looked after it self since then not needing any measurements or input from me (just the way I like it). Unfortunately I have to now get a good...

The test strips looked like they maybe the answer but my simple logic means at least one of the strips was way out. My first strip said 900 ppm I added 100Kg to a 56000 l pool so added around 560 ppm (total 1450 ppm) but next test strip stated 3700 ppm. This was new box of test strips (and did...

Old thread I know. But still very relevent(to me especially) . Wouldn't contaminates in pool water affect the reading of a Refractometer?

Hmm It appears I can't get the Taylor K-1766 kit here in the UK...

A very long thread so please excuse me if I've missed a similar post for the UK. My best price is £11.20 including tax for 20 L of 12-15% Sodium Hypochlorite from Wynnstay farm supplies. In the UK if you order 20L of it then it's hazardous and will cost up to a£45 for delivery. If you order...

Ah, Ok. Thanks for the info.. I may need two kits then ...

Will my Taylor 2006c kit (when I get it) have facility to test the salt levels ?