Recent content by Pep3az

I set one of my light schedules to "Sunset" and it turned on at the correct sunset time and not the time showing on the schedule page so the IntelliCenter and software version 2.017 are working correctly. This definitely is looking like a display issue with the new iPhone app/web app software...

The behavior is the same on both the phone app and the web app. I just set one of my lights schedules to "Sunset" and then "Sunrise" and when you go to the Home page the schedule start time is 6:12pm for "Sunset" and then 6:12am for "Sunrise", the correct Sunset and Sunrise times for my...

Anybody else had an issue with time scheduling after the latest iPhone app update? For my lights schedule I select "Sunset" for the start time so I don't have to manually set the time all year long. It seems after the latest iPhone app update that the "Sunset" selection uses the "Sunrise" time...

When your sporadic light does work are you happy with the light level in the pool? If you're happy the 36 watt one will give you about the same level. If you don't think its bright enough go with the 40 or 50 watt replacement.

How often do you plan on running everything together at max amperage? It looks like you could breaker and wire size at 80 amps, your 3 big loads are 67 amps at max. Also, you could run a smaller neutral wire as 67 amps of your 87 amps are 240V

You are interpreting that correctly. Combine the white and violet wires from the transformer to neutral/white wire that connects to the neutral bar. Combine the yellow and black wires from the transformer to the load side of the relay you are using. Please ensure the power if off before you...

I see there's new version of the IntelliCenter2 app for iPhone released yesterday, not sure about Android. Maybe that might help?

If your current heater is still in good shape and usable what about just adding a second heater and run it in parallel? PEP3AZ

You can get a couple of these plugs: https://www.homedepot.com/p/Oatey-Gripper-2-in-Plastic-Mechanical-Test-Plug-33401D/100346775 Put them in on each side and don't run your pump and see if the water level goes down at the same rate and that way you'll know if it's that pipe or somewhere else...

Yea! That would be a very welcome addition.