O
Latest activity Postings About
-
-
Ool_whistle_britches replied to the thread Circupool Core55 or RJ60?.I believe it’s 10k hours.
-
Ool_whistle_britches reacted to Mdragger88's post in the thread Advice on pump and filter replacement with
Like.
If they want to sell you something they should answer your questions. The general consensus here is to get 3 quotes if possible. You... -
Ool_whistle_britches replied to the thread Pump won’t pump after refill.Is it possible the pump timer got left on and it ran dry during the refill? Pump lid o ring in good shape, clean, lubed up, and didn’t...
-
Ool_whistle_britches reacted to mas985's post in the thread Should I install a valve before this pump (picture)? with Like.
The pump basket not filling during priming phase is usually caused by one of several things. Suction side air leak Impeller Clog Return...
-
Ool_whistle_britches replied to the thread Advice on pump and filter replacement.Just rereading the story, I don’t really feel like you think you’re getting forthcoming answers. If you think you’re getting the...
-
Ool_whistle_britches replied to the thread Should I install a valve before this pump (picture)?.@PoolStored Thank you for writing this succinctly. I kept playing with this answer in my head and gave up on it when I started to think...
-
Ool_whistle_britches replied to the thread Suggestions to repair and maintain my pool's coping & deck.It’s just water doing its thing. Dissolving minerals out of a soft rock. Limestone is pretty notorious for it. It’s also plentiful and...
-
Ool_whistle_britches replied to the thread Suggestions to repair and maintain my pool's coping & deck.Also look into SL-1 (self leveling for floor application) or NP-1 (vertical surfaces). I believe that’s a common generic IIRC.
-
Ool_whistle_britches replied to the thread Suggestions to repair and maintain my pool's coping & deck.Somewhat familiar with that area. My guess is that its primarily freeze related. It’s odd that a few pavers have cracked somewhat in a...
-
Ool_whistle_britches reacted to TwinsPool's post in the thread Should I install a valve before this pump (picture)? with Like.
Thanks, yes, I have read about the additional head that check valves can cause due to the springs. I've read that some of the experts on...
-
Ool_whistle_britches replied to the thread APX PERFORMANCE P40 Aftermarket Replacement Cell ....Anyone??.How hard are you running your cell and what does your water chemistry look like (CSI specifically)? Do you have one of the recommended...
-
Ool_whistle_britches replied to the thread Should I install a valve before this pump (picture)?.I think what you’re talking about sounds logical. Kinda is what it is at this point. Keep in mind those check valves typically require...
-
Ool_whistle_britches replied to the thread Should I install a valve before this pump (picture)?.Just to confirm, are you noticing/measuring this air when you are running the pump 100% or are you measuring at a different speed? I...
-
Ool_whistle_britches replied to the thread Featured Circupool Core Control 55 Initial Thoughts.I wouldn’t put an additional box on it. It’s got a pretty good sized heat sink on the back that needs airflow. Manual attached. Mine...
-
Ool_whistle_britches replied to the thread Advice on pump and filter replacement.I can understand that. You might consider calling an electrician, texting them a couple of photos, and asking them for an hourly rate...
-
-
Loading…
-
Loading…