Recent content by ndnchapathi69

I'm getting the light that flashes 6 times in the motherboard of the antenna. When trying to pair with the panel, it doesn't seem to pair. The support person said i should buy the screen logic system. Either way if i buy a motherboard of screenlogic, its looking like 600-700 bucks. Is there any...

Hi @ajw22, i should add that this is connected to an easy touch panel, where the temperature controls are. Does that change where the issue lies at all?

I have this Jandy lite 2 heater. When i set the control panel to heat the spa side of the pool to 104, it stalls at 90. Any idea what I should do to fix this or diagnose it?

Finally found the fix, replacing the o rings on the 3 way valve for the actuator did the trick, the machine is way more quieter than before, and using less energy.

Thanks @1poolman1 , so i guess it does make sense then to go ahead and open up the pump seals and replace them with the new kit i got. I did by the drain king bladder, but regardless it sounds like the suction leak is on the pump side.

Another update @1poolman1 , i might have found a potential issue. So the pump primes fine, i thought that there might be a clog in the skimmer pipes to the pump. When i took out the skimmer basket, i noticed the skimmer float valve kind of floating, so i took it out and noticed the flap on it is...

@1poolman1 finally getting back to this over the holidays. I just want to confirm the steps i tried, before i take apart the pump to replace the seals. 1. I bought a new o ring for the pool pump lid, lubed and replaced it, and then secured the lid on again(had to use a rubber mallet lightly to...