mShark's latest activity
-
I haven't been able to figure out how to read a members signature in the mobile version of TFP. What am I missing? -
mShark replied to the thread Ph Meter and the Taylor drop test.I've enjoyed my electronic meter. I'm not able to get good readings using the pH test that comes with my TF-Pro Salt test kit. There...
-
I have been working to get my TA down again after I drained off about 45% to lower CH. When am I good to add the borate? I understand it...
-
mShark replied to the thread Should I go with a 24" or 30" Sand filter?.I've had zeolite in my old filter twice and I regretted it both times. Good pool sand filtered better and didn't tend to channel. Both...
-
mShark reacted to 1poolman1's post in the thread Should I go with a 24" or 30" Sand filter? with
Like.
First, stick with pool sand, it will last for many, many years, is less expensive. You would be happy with either of those filters... -
I knew I was Pool Stored when they spit the following line "Here's what you need to add" = $$$ "after adding this chemical, run your...
-
I'd second the RJ series. This will be the 4th year, plates are clean as a whistle (I manage my CSI and never get scale). Very robust...
-
mShark replied to the thread How do I find my bonding connection?.I will keep an eye out for a stray wire when I work on the gardens this spring.
-
The only thing I don't have done with my new pump is connect the bonding lug. I have never found anything that looks like a grounding...
-
mShark replied to the thread Experience with VS pump and suction cleaners?.I found with my VS pump that my suction cleaner, a Polaris MAXX (very similar to the MX-8 which was my previous cleaner), cleans at 2500...
-
mShark replied to the thread Circupool and VS pump.I recently made the same change. I connected the pump bypassing the timer and left the SWG on the timer. I have since added current...
-
mShark reacted to Newdude's post in the thread Is there a device to slow down our 2 speed pool pump.........electricity bill is $$$$ with Love.
I'd get an Old pump energy booster. It will literally pay for itself. Possibly a few times over.
-
mShark posted the thread New diverter valve cracking at thread socket in Pumps, Filters, and Plumbing.I have a CMP diverter valve that I installed a couple of months ago. While hunting an intermittent air leak I found a crack. I seem to...
-
-
-
mShark replied to the thread Detecting if a pump is actually running?.Finally installed the current sensor and have it working. I could only get 5 passes through the core with the 12ga stranded wire I used...
-
