Recent content by MillennialFinance19

We had bad storms last night including multiple power outages, and I'm fairly certain I lost my EZ Touch mother board again (2nd time). My display is blank and about half of the button lights are stuck in the "lit" position, and the IC-60 isn't running and my pump is on manual. Nonetheless, I...

UPDATE 2,391: After my problems returned again, I didn't do a complete SLAM as I had no idea what the issue was. First, I brought my salt level up to 3,600 from 3,100, which is Pentair's recommended level. Next, I used Orenda PR-10,000 to remove the 390 ppb in phosphates I had. After a few...

Update: I lost 3ppm overnight. No clue how I'm losing chlorine again when I just returned to normal levels.

Alright... I'm back. It took from Sept 5th until now running my SWG at 20% to get back to 6-7. Once I reached that level, I turned it up to 80% and left it. Yesterday, I'm down to 2.5. I added 2.5 gallons of chlorine and went to bed. Just measured it again and I'm at 4 while running the SWG at...

Well, if that isn't proof of the flaws with the ColorQ test kit, I don't know what is. I just tested it with the Taylor kit and got 110!

One more question - I just tested my Alk and it is at 38. It was at 90 when I started this. Should I bring this up now?

9/5 update: OCLT revealed ZERO chlorine loss. I have my SWG off and am letting the chlorine level off. I added enough stabilizer to hopefully bring me up to 80. I'll check this evening and see where I'm at. Thanks for all the help! Hopefully I'm done for now :)

Got it. That would have been great to know. At least I'm not too far off, and I'm sure it could be worse.

Night before last, my drop was 1.5, so it appears I've made some progress. Last night I didn't test as I wasn't home. Hopefully tomorrow morning I have less than a 1.0 drop and I can wrap this up. Question - I'm running the SWG at 100% during the day but am still haven't to add liquid chlorine...

Alright. Evening update (pictures just for visual aid). I came home and immediately cleaned behind both lights. They were spotless (see photo). I also blew a hose into my main drain. I also cleaned the umbrella holder in the swim out - this had a torpedo toy and some green algae. This is...

Thanks. Tonight I’m going to take the bubblers out and ensure the umbrella post is clean.

Thanks, I appreciate the response. Pool has been clear the entire time. I had CC of .5 in the beginning, but that’s gone. I haven’t tested every two hours as I’m working 12-hour days. Tonight I’ll test at 5, 7, and 9 and report back.