Recent content by mareas

I've called around today which helped conclude a few points: No venturi tees designed for fiberglass installs At least for the popular brands which only use jet manifolds/bodies. The hayward might be a better alternative if this is the case as they have the 1.5" line rather than a 1" line for...

I'm with you, I meant it to be read as a standard fiberglass pool and not below a common standard outside the US. Understand the point though and I'm not fixed on the manifold they are just often recommended with the fiberglass pools and hard to find alternatives. CMP might have a system where I...

They are both fiberglass and should be "normal" as they are locally produced for export to USA. Not disagreeing with your experience here but they specifically state 2" going into 1.5" for the jets on the 1.5HP Air Supply Silencer. Would you recommend an alternative model that recommends 2.5"...

Yes think I confused you there. For the circ system the pool has four returns and the spa has six jets. I've put it on a diagram to show more clearly.

They Jet manifold is Hayward SP1434PAKA with 1.5" water and 1.5" air which is looped with six jets on the jet pump. The return for the circulation pump also has six jets which I could put some onto this loop or create a second loop that so the 3" isn't going directly to 1.5" If I have low floor...

Thanks, that helps a lot! I wasn't sure if the superflo would be ok for the circ pump on a larger tube size but I guess it can impact self priming? 1. Would you recommend to use 1.5" for air instead of the 1"? I'd overlooked in the Air Supply manual it recommends 1.5" for the jet so I can make...

Thanks! The buildings designed and not as a worry. It’s got AC, dehumidifier and EHR with HVAC pro on calculations. Blower door tests etc. I’ll probably install a three way valve between the pump and filter for removing water. A water point close to the pool for cleaning and filling.

Hello all, We're planning our indoor pool (14x34x6) and spa (7x9x3) build in an area with no certified PB's and in an unregulated area however I've been trying my best to abide to US/International standards. I'd like to share the process we've made and ask for your valuable feedback! Climate...