Recent content by LutherKrank

Mark: Thanks much for the info, makes sense. I can get it to mid teens at about 2,500 or so, so that works. You've been very helpful and I do much appreciate it. These boards are fantastic, a lot of really knowledgeable, kind people willing to share. I'll tell you, since I got the pump and...

Ahh, interesting, I was thinking that it would need some kind of reasonable 15-20 psi pressure for some reason. How does one then figure out a backflush schedule / indicator? I was running 15-20 psi with the old pump, backflushing at 25psi. Now, I have no idea when it would get to the former...

Hmmmm, well, for now I'm going to monitor the power usage even with the booster, am wondering now if some other kind of pump, i.e., another intelliflo would do the boosting at less wattage than the booster. It's amazing, the thing is running at 900 rpm, at 100 watts. What pressure does a sand...

Mark: Are you saying I can hook up the current Polaris and test wheel RPM straight off of the main pump to check?

No, haven't tried it, I'm going to try to get ahold of a flow meter to see what runs through it if I bypass the booster.

Well, talked to the "The Poole Cleaner" people. Turns out you can't run without enough flow, so the 1" pipe' won't work. So be it until I get another idea or find another port. Oh well, PG&E wins on that one. However, I got the Intelliflo installed and it's running at 1500 rpm and under 200w...

Thanks, Dave / Mark. I think my pool plumbing guy has a meter, will check flow. I'm going to contact the mfr. this a.m. to see what they think. I see the manual, it's interesting that it uses the turbines and flow, not pressure to make it run. I'll update what the mfr. thinks.

Thanks Jason, I do realize that bigger would be better, if it was 1.5", I'd convert that line to suction side and be done with it, but for some reason it's 1" all the way and it's 60' away from the pool under trees and concrete, not really viable. I'll probably give it a try, a couple hours at...

Gentlemen: And Ladies, sorry. I'm trying to figure out if I can plumb from the pressure side through a valve to a 1" pressure return line currently operated by a PB-4 3/4hp booster. I want to see if my Pentair Intelliflo 011018 VS pump can pump enough water to run a "The Pool Cleaner"...

Is the Taylor K-2006 FAS-DPD test kit reasonable?, about to order

Thanks all for the recent responses, I just saw them as I posted the chemical analysis. I'm heading to the pool school forum to look up SLAM and how to get a good test kit. I obviously have algae, just realized that high alkilinity would lead to high algae, geez. I'll start reading now and...

Sorry for slow response if anybody still reading this thread, too many jobs... Using a test strip kit, I get: Total Chlorine 2 Free Chlorine 1 PH 8.4 Total Alkalinity 240 Cyanic Acid 100 I'm aware the PH is high, has been ongoing, seems like it'll eat as much Muriatic Acid as I'll give it...

Water is clear, using test strips, all good except for very high total alkalinity, will put up numbers this afternoon. I am having some issues with yellow algae and spots of black algae where water doesn't seem to flow as well, i.e., sit step in corner of pool, and net tie thingies underwater...

Backflush takes a few minutes, I do it the same as my local pool guy showed me. Then there is a setting for rinse, which I do after the backflush. That's funny, probably true about the ocean and sand, does make one think. The Leslie's guy says is dangerous to run above 20's, sounds like...

Gotcha, sounds like I'm on the right track. I realize that the 3hp might be a little overkill, but i have a potential spa replacement coming up(trashed for now and not a high priority) and may put in a water feature at some point. l'm aware of the Haywards, but my local guy says his...