Recent content by lamboman316

I was playing with the idea of using hose clamps at first, I thought it would remove the finish off the legs after awhile and start to rust. I don't want that. I decided to drill 3 holes in the pvc, and ran 14" zipties through and around the leg, I pulled them very tight and they are working...

I finally have everything finished for the summer. I've added solar heater this year. I' ve made my version of Solar Cover saddles, it use to be a pain to take solar cover off and leave it on the grass because when you went to put it back on all that debris that got stuck to the cover would end...

I found a brand new solar heater on Craigslist, the guy said it's a fafco 4x20. I asked him if it's the Solar Bear, he said it has a bear on the box. I was reading some specs and said a 1hp pump would handle installation up to 30 ft away. My question is, is this a good solar heater? and will my...

I've been thinking about adding a solar heater to my 16x48 Ultra frame. I've been looking at the solar Pro XD1 and also the XD2. I came across a newer style by Solar Arc. Does anybody have one? i like to get as much info on an item before I buy anthing. Thanks. Below is the Solar Arc that I'm...

I liked that, I tried to find that in my area, and not one Home Depot sells it. How much did that run a sheet?

I would like to hear from people that have done the foam under there ultra frame. Last year I thought about doing it, but after buying the pool and upgrading the pump and filter I couln't justify spending $200 on foam. The season is almost time to start for me, and once again I am thinking...

I have that same pool, I run a Hayward 3/4 hp pump and a Hayward DE filter. I got them off craigslist. My pool was sparkling clean. I dealt with the intex (junk) pump on my blue ring pool, I told myself when I upgraded to the ultra frame pool, updating the pump and filter was the first thing I...

this is what I have http://cgi.ebay.com/Off-Line-Chlorinato ... 2eb52278e5

I have a 16x48 ultra frame, I have a 3/4 HP Hayward pump and a DE filter. I was wondering what the pressure should be on the gauge. I getting 8 psi. Is that ok, or should it be higher? thanks

ITS READING 8

I have a Hayward Power Flo 3/4 HP pump. I would like to know what the GPM is for this pump. I have a offline chlorinator and I'm thinking the GPM from this pump isn't enough for the chlorinator. THANKS.