Recent content by kucster

Wow thank you so much for your continued help. I'll see what home depot has and try the super glue and it doesn't work I'll work on getting screws. Thanks again! Sean

Thank you so much for your help, I'm not very good with this stuff so I would like to clarify. Do you think I could buy some type of cover that will fit around it and the super glue to hold it?

For what ever reason I have a capped off port at the bottom of my pool, it wouldn't be a big deal but the pool cleaner gets caught on it and leaves keep getting in it. I'm wondering what type of cover I should use for this, is there any that would not require me draining the pool, maybe a...

I've been noticing white particles in my pool filter I think are the pool cleaner "scraping" the pool. They seem to be flat small enough to go through the skimmer and hard. I am using a ZODIAC RANGER which I inherited from my father who had a liner pool. I'm not sure what type of pool I have...

Thank you for your continued help. Yes I removed the old gasket and replaced it with a new one that was in the kit, I also used lubricant on it. It does look like from the picture the grommet is missing a thread but it tightened well.

that leak is at the top of the pump? Yes Looks to be under some glue/silicon? On the wet side of the pump, left to right, you have the motor/mounting plate/seal/west side It looks to be coming from under the plate, I'm not sure exactly where. I did replace the outer seal which the old one had...

I hope you guys had a great weekend. I changed out all the seals and unfortunately it is still leaking from the top. I thought it was going to be the large outer seal (nearest to the bolts) as it did have a flat spot but the kit came with one and it didn't help, I was sure to use liberal...

I think a 1 HP standard motor might be the way to go for me. I don't have 230 at the pump and the price is a bit steep for me at this time. I think just for troubleshooting this weekend I will order the kit below from Amazon (they can have it here by Friday) and see if it still leaks. If not I...

I was wondering if the 3/4 HP motor would save enough to make the impeller worth it. I think to start I might just order the, Hayward SPX3000T Housing Gasket and the PS-3868 Seal Assembly. If the leak goes away then I'll order a new motor does that sound prudent?

Thank you for your continued help. Would I be able to see the housing crack from the outside or would I have to take off the motor?

Thank you so much for your help, I took a screenshot of my cart does that look about right. Dropbox - Pool-Cart.png There are 2 motors in the cart because I can't decide on what to get, my calculations show I could save about $80 a year with the efficient one but I'm a little worried about it...

Thank you so much for your continued help, would I also need to replace the impeller to work with the 3/4 HP motor or will the one I currently have that is working with the 1 HP work? - - - Updated - - - I also found the below Energy Efficient Motor, do you think it would be worth the upgrade...