Recent content by jsimonkeller

AH . . . I knew there would be a catch :( I guess I can go into the screenlogic configuration and turn OFF the freeze protection and manually run the spillway a couple of times a day to refill the spa when I notice it and the put the freeze protection back on.

I know this topic is well worn, but my Pentair system in freeze protection, while swapping between pool and spa mode every 15 minutes slowly drains the spa over a 24 hour period. I assume there is some loss of water each time it switches and I know there could be a bigger problem to solve...

Good morning. So I was wondering about cutting into the fiberglass to fix this pipe issue in the light hole on my spa. When the original light sleeve was installed a 2" hole was cut into the fiberglass. This 2" hole will not allow me to fix my problem, as I will need the hole to be large...

:oops: So what your saying is that all of these lights will potentially melt and disintegrate . . . . that's not awesome.

Florida Sunseeker has offered me nothing really. I had actually purchased new ones to replace the ones that went out, but once I pulled them out and realized the severity of the damage, I called them and they did not act surprised and just refunded the money to me on the new lights I had not...

So now that I removed those crappy Pool Tone wannabe and dangerous GloBrite replacements that melted inside the pipe (PoolTone Problems!!!!!!!!) I have removed what's left of them and the debris and carnage they left behind. Unfortunately the GloBrite sleeve has melted leaving a hole!!!! I...

You may be onto something regarding the flex seal. I keep losing my PoolTone lights and this post shows the way they look when they come out! https://www.troublefreepool.com/threads/pooltone-problems.304557/

If you have not yet made that purchase, you should be wary. Check out my post below. https://www.troublefreepool.com/threads/pooltone-problems.304557/

Thanks. I sent these over to the PoolTone support email, so we will see. I am definitely considering going back to Pentair before I put new lights in so I don't have to go through this again.

So, like many others on this site, I was tired of the short life of my pentair LED lights and made the switchover to PoolTone. I got the NICHELESS 1 1/2 INCH (SMALL FACE) POOL OR SPA LIGHT and installed them about 18 months ago. The spa light stopped working about 2 months ago and then two of...