Recent content by jsengxx

Hi, It was finally time for a new pool pump. The 0.18hp original pool pump stopped working, I was hopping for this to happen:) The pool pump had no power for cleaning the sand and vacuum cleaning was a pain too. I want to implement this injection system to this pump but I have bought some...

When I´am vacuuming I always close de main drain so I have more suction power.

Ok. Than the only option is changing the hole unit for a better one. So for now I will stick to this unit until it is dead:). This pool pump is doing a good job only when I´am vacuum the pool I miss suction power. I´am gona tray the triangular vacuum head with brushes maybe this head will give...

I have another question: Can I change just the motor off the pool pump? I have here and old motor that is 0,33hp and I have dismantled it so now I have only the engine. It is 310w but on the plate the rpm is only 1370. Is the impeller off an larger pool pump bigger then my engine? If I change...

I know that the water is supporting the pressure off the dirt but if the dirt settles for at least 2 years ( the ground here is very hard, for digging you must use a pickaxe) you can safely change the liner. I´am talking about leaving the pool for max 3 days without water.

It is 48 inch and I dished the bottom out where the main drain is for another 6 inch. The next time when I have to change the liner I will order the liner from the 52 inch model and will cut the straps out, I think they are not required when the dirt is settled, and dish the bottom out for about...

Hello, I´am happy with this pump. I run it for 16H and so I have 2 times the volume off my water passing threw the filter. The only thing is when I have to vacuum clean the pool, I have little suction power whit the vacuum head that I have. It is the vacuum head that is for concrete pools with...

Yes I have a 3 step stair like in the pics.

I´am going to do the deck like in this pics:

Hello, Here are some pics off my 12x24 above ground pool that is buried. The deck will be made in spring when the dirt is settled. I have put foam under the liner but forget to take a pics:( I have one question regarding the pool pump. The manufacturer stated this combo pump and...

I have the 2 way test kit that wil test for PH and TC. No other test kits are available here in Portugal:( P.S. I have completed my profile. Thanks, JJ

Hello, I have read here: oto-test-for-chlorine-i-am-quite-confused-help-t4994.html That you can indeed see what the free chlorine is. Can some one or Jasonlion explain how you do that? When I do the test with oto, when I put the 5 drops in the water you can see a color formation is this the...

Hello, Can I use this Peristaltic dosing pump for aquarium to inject chlorine into my pool? http://www.ebay.de/itm/Dosing-pump-Peri ... 2575e729a3

I´am burying the pool totally inground. the last 8-10 inch off the pool are gone a be made off concrete with pavement on top off that so that the concrete is not doing any forces to the side walls off the pool.

Hello, I´am going to bury my oval pool and here in Europe they always make a cement bed as a foundation for de pool but I see that in the VS you bury the pool on sand. Can I put the pool on the ground or must I do some ground prep? The ground here is a solid one so I think that the water can...