Recent content by Jordywilson

Hi all, I had a few questions about my pool that was built and filled just about a year ago. Pool equipment should be in signature aside from the A&A heads/IFCS I have, but I’ll also drop pictures of my setup and chemical levels at the bottom of my post for reference. Also wanted to mention that...

Hey everyone, I just recently had my pebble pool filled around April 1st, and I’ve been very diligent about making sure all of the chemicals are in balance (TF-Pro test kit). I’ve noticed some calcium buildup around the waterline tile that I believe started appearing maybe a month and a half or...

Oh duh, I’m stupid. I forgot about the spa jets 🤦🏻‍♂️ So when the system is in pool mode though, water is being returned through the in-floor systems right? So when it cycles to the spa heads, it’s returning a bit of water there each time?

Appreciate you sharing your insight on it. So as you can see with mine, I can’t have the in-floor completely open and the wall returns partially open at the same time (unless I’m mistaken). However, as long as the in-floors are still cycling through the zones, I don’t mind not really using the...

Yes, moving that Jandy valve to “Return” diverts the water to the wall returns instead. I believe there are 5 or 6 wall returns around the pool. Is that a good amount? I’ll definitely see about getting that plumbing change made to run the SWCG through all of the different modes. Do you have any...

Got it. I adjusted it to be about 25% MD 75% skimmer. I understand how I can adjust the speed (RPM) of the IntelliFlo3 to different levels in the automation app, but I’m confused on what variable flow means then. How do I adjust the flow, and what reasons would I have to increase or decrease...

Thanks! To answer your question, I’m not sure. They didn’t really take input from me when they were doing that, but I honestly like how it’s taking up the least amount of space as possible. Is the only problem with it just that it’ll be a hassle to clean the filter? I can probably deal with that...

Hi everyone, I just recently built my first gunite pool and have done tons of research on TFP already to learn as much as I can about it, but I have various questions that I was hoping some folks could help me with. Before I get into it, my pool equipment and specs are as follows: 17k gal pool...