Recent content by jon335

i had similar issues, i cleaned out the filter and it helped with the air under the lid. Good luck, it drove me crazy for the longest time

Thank you for your reply, just going crazy through it all, I would like a booster pump for head cleaning, only way it works if I close off most everything and only return water to cleaner heads and they’ll pop up, they don’t really work that well and I got a dolphin and it picks up fine sand and...

New build 17k pool, SWG, spa, and floor cleaning system. Initially had 2 speed Jandy pump before VSP came in. Can't tell if it defaulted to low or high speed on the 2 speed pump but noticed maybe 2cm bubble under the lid and unsure if i had air in the returns (definitely not obvious bubble...

I have the QuickSkim x 2 with the return lines there, IFCS, and Spa returns, no other returns otherwise. Thank you

Thank you mknauss, i wondered about that (higher rpm causing venturi effect to pull in air). I see my hartford loop: so when the rpm is high and the water is coming out fast then its drawing air from the air line into the spa jets? when its low its not creating enough flow to pull in air? Is...

I have a new pool, variable speed Jandy Pump, air blower to spa. When I set my RPM above 2500rpm I get air bubbles out of my spa, if I set my set it to spa mode: return and drain from spa only and turn up the pump then I get tons of air bubbles (not as much as turning the air blower on) but...