Recent content by johnnvns

To: Bright1978 I connected my water hose to a 3/4 inch pvc pipe using an adaptor I got at Home Depot that allows the connection and at the water turn on valve, I connected a Water Timer, to come on every 3 days and fill the pool for 10 minutes at 5 am, In the summer, I had it come on every 2...

Here is my Fountain, This was so easy to make, took me about 2 hours and 6 Beers, hahah I used a 1-1/4 inch Cantex Conduit Box Adaptor I bought at Lowes and a 1-1/2 inch PVC Coupler for my connection at the SWG and Pool's Output. I sanded the 1-1/4 inch Cantex Conduit Box Adaptor so it would be...

How do I know if the Intex SWG is accurate if my salt strips are telling me something totally different. The pool store said its high, the Intex SWG is saying High but the Aquachem Strips are saying Low, so now I need a third test, The Taylor Test kit is supposed to be good

The reason I added more salt in the first place was because my strips were reading 1950ppm so I wanted 3000 ppm, I also do not know the tolerance level of the Intex SWG. I dont know the ranges of its codes on High salt and Too low salt, I needed to have a standard to go by, because I don't know...

I have a major problem, with the AquaChem Salt test strips, I was getting 1950 ppm so I added 80 pounds of salt, now the strip says 2950ppm but the pool store measured 4900 PPM and my SWG is flashing code 92 HIGH SALT. so I drained some water and added fresh water and my test strips are saying...

My Aqua Chek strip indicates that I have 1950 ppm of salt, I have added 160 pounds of salt to a 6,000 gallon pool. so I added 40 more pounds and now Aqua Chek reads 2450 ppm. and Intex SWG is giving me code 92 HIGH Salt, so I drained some water and added fresh water and the code went away and my...