Recent content by JeffKL

Thanks. Yeah. I really don’t want to do it myself. I had a small company that quoted me $5k. When I called to schedule the job they never returned my calls. So now back to square one. Hope to find someone for 10k or less.

my pool had chlorine but the floor and walls got bad. My walls were like 200 grit Sandpaper, so the algae had a good place to hide. Then realized after draining the bottom drains were completely full of sand/diamondbrite. Same for the filter. So I wasn’t getting circulation. So my water had...

Thanks everyone. I was able to fill a 2 gallon bucket from what i vacuumed from the drains and pool filter. I basically sprayed two coats of clear flex seal and let it cure 24 hours before I filled the pool. I did a small test area and was surprised how smooth it was and the diamondbrite...

This is crazy, I just sprayed 4 cans of clear flex seal on my 15 year of diamondbrite. I got ghosted by a pool repair guy. My diamondbrite was failing so bad it clogged the bottom drains and caused a poor circulation algae bloom. I drained the pool. Cleaned the walls of algae stains and felt...

The roof is completely flat. It’s a concrete roof in Key Largo. I experimented by running a hose from my pool pump. Pressure was much too low. On to plan B.

Hello Wondering if I can put a solar panel on my roof. It’s 36’ above the pool. A flat roof with plenty of space and sun. I have a tiny yard with lots of shade. The only place for panels is that high roof 3 floors up. The house shades the pool after 4Pm. I currently run a 1.5 hp...