Recent content by jeffblue

  1. J

    Poor Flow from Intelliflo 3.0 after dissassembly/reassembly

    Thank you, i will compare the wattage its pulling at a given RPM to the chart today. I am going to install the new seal kit tomorrow!
  2. J

    Poor Flow from Intelliflo 3.0 after dissassembly/reassembly

    Thanks, well what you mention does give me hope that its the shaft seal, i hope its that since i have the replacement part on the way. i'm glad i opened my pool early this year since it seems like it's going to be taking much longer to get it all sorted with all these issues. i dont think its...
  3. J

    Poor Flow from Intelliflo 3.0 after dissassembly/reassembly

    Thanks i appreciate the reply. So, funny you mention that, the seal plate had a ton of corrosion on the top right bolt, i can see now that this could be another potential issue? I also did notice some corrosion behind the impeller. paint bubbling/flaking off when i disassembled the impeller. In...
  4. J

    Poor Flow from Intelliflo 3.0 after dissassembly/reassembly

    Hey Everyone. So my intelliflo which i disassembled and reassembled the impeller and front assembly on (due to an issue with not starting initially), now that is reinstalled onto the pool is performing in a way that i can only describe as 'poorly.' Numbers wise it seems fine. i dont have a GPM...
  5. 1623415523859.png

    1623415523859.png

  6. J

    Questioning my Setup - No Check valve on Solar Apparently

    Over the winter i had some branch fall and damage some of my plumbing. I have a 3 way valve for my solar. The pipe that leads to the solar from this valve was cracked along with the elbow and the valve itself. I ordered a replacement valve and was lining things up and making a list of parts to...
  7. 1623414999104.png

    1623414999104.png

  8. 1623414919043.png

    1623414919043.png

  9. J

    Solar Sizing advice

    So, update, the panels are being installed now. The 496 square feet of panels that the installer and i originally discussed have been installed. i was under the impression originally that this would be 'maxing out' my roof in terms of space, however he informed me that this is not the case. i...
  10. J

    Solar Sizing advice

    Thanks for providing this. Which cells must be populated in order to get meaningful data?
  11. J

    Solar Sizing advice

    agreed. If its a matter of convenience and money doesn't matter (which i imagine it doesn't if you use a NG heater with no cover, why not get an automatic solar cover? it'll cost less than you'll spend on heating a pool with no cover, and then theres no inconvenience.
  12. J

    Solar Sizing advice

    yea it seems like with solar you need to use a blanket, which is fine with me. i have a rockys roller reel which is easy enough to use. my fiancee can take it on and off the pool herself. how much do your gas bills run since you're only supplementing the solar and the gas isn't your primary...
  13. J

    Solar Sizing advice

    Well, looks like my roof made the decision for me, since i can only fit about 500 sq feet of heliocols. i was able to get a quote for 5750 installed including labor and controller etc for ~500sq feet (i think its actually like 496) of heliocols including. install date is set for next friday...
  14. J

    Solar Sizing advice

    Thanks! Wow and thats in canada? Thats awesome
  15. J

    Solar Sizing advice

    Thanks, i tried downloading the excel link, but it gave me a 404 error. Can you please send me a link to it in private message?