JamieP's latest activity
-
JamieP replied to the thread Replacing SWG flow sensor - matching wires.My new cell is installed and running. The initial salt reading is spot on as well. I'll see if I can track down a three-wire flow... -
JamieP replied to the thread Replacing SWG flow sensor - matching wires.Pump Communication is established again and pump is up and running. Strange for that to happen, though.
-
JamieP replied to the thread Replacing SWG flow sensor - matching wires.Hi Jim. I think that's a good idea about getting a new 3-wire switch to try to fix this cell but using my spare cell in the meantime. I...
-
JamieP replied to the thread Replacing SWG flow sensor - matching wires.Update: This morning my weather and water temperature were the same as yesterday but the SWG is no longer creating chlorine. I shut off...
-
JamieP replied to the thread Replacing SWG flow sensor - matching wires.I should add that Screenlogic no longer gives me a low salt reading even though it is saying this all to zero. That's probably why the...
-
JamieP replied to the thread Replacing SWG flow sensor - matching wires.Thanks for that explanation, Jim. My current water temperature is 62. I'll be interested to know if the flashing salt reading goes away...
-
JamieP replied to the thread Replacing SWG flow sensor - matching wires.Great news!! I'm not sure exactly what's going on, but I re-installed the salt cell just to get my pump running again. The original...
-
JamieP replied to the thread Replacing SWG flow sensor - matching wires.Darn! Thank you for that information, though, Jim. I had this sensor on hand from a while back. I'm not sure why I bought it but I...
-
JamieP posted the thread Replacing SWG flow sensor - matching wires in Salt Water Chlorine Generators (SWG).Hello, I'm troubleshooting a persistent 0 salt reading on my Pentair IC-60 by attempting to replace the flow sensor following...
-
-
