Recent content by Jace4fla

I always use http://infloorpoolparts.com but your source http://aapopups.com is a tad cheaper for the replacement gaskets, but I always call and usually get a better deal after talking to the repair department. My guess is that you could either remove the heads, remove the gasket and clean off...

No chlorine is being generated. I have algae.

MannyT, the SWG is not on a timer. it is wired to start and stop with the flow of water and pump operation. I believe that the cell is bad, but want to buy the correct size ONLY after making sure that the board is still good. Mrs. JACE will be happy spending money on chlorine rather than spend...

Sorry, forgot the t-9 reading! Duh. Salt level tests were done by two local stores - both around 3400 ppm.

I watched that one. Thanks! - - - Updated - - - Thanks for the above info. Man, what an amazing amount of knowledge you can pick-up from here and spending a few hours watching videos! I was told that the cell was made in 2009, but from what you say, it was made in 2014, correct? Also, my board...

the cell serial number is 3E149-200809. I don't understand what you mean by: If the salinity reported by the box is accurate in both polarities, the cell is good.

Hi all. New to the forum and salt pool systems. I inherited a pool with numerous issues in 2016. I got the in-floor cleaning system working again, added a solar heating system, replaced the pump, got the salt level up to normal, etc. Now I have new issues. The chlorine levels were not where...