Recent content by IdskovDK

Depending on the type of motor en the blower you can either use a regular dimmer switch or a VFD. Easiest way would probably be to control the airflow with a valve though.

Does it still happen if you disconnect the control-panel from the pack? You probably have a faulty panel or board. One thing to try though would be a clean of the board as it looks to be absolutely filthy. A short in the right place would absolutely be able to turn on the blower, but one in the...

As long as the hi-limit light is on you won't get power to the heater. Check the sensor and relay. The relay you can jump, but the sensor has to return the right voltage. So first verify the relay and then try disconnecting the sensor. If it makes no difference if the sensor is on or not, it's...

Most Spa-packs/controllers have serial-interfaces. You could do an Arduino-based Z-wave or webservice integration quite easily. That way you could even get some information back regarding current temp and so on.

New filter has already been ordered and as soon as it arrives I'll drain and fill as well as change filter. Still interested in hearing if it's a common problem with the filter or if it's just me.

Hi. I have recently fixed up a freeze-damaged outdoorspa (split manifolds), and am currently getting to know it. It's my first spa and my only pool-experience before that has been a 5000L kiddy-pool with sandfilter. To begin with I had a lot of biofilm in the pipes so to get rid of that...