Recent content by hilmiorta

I’ve seen in the past with app upgrades that the heater got dis-associated from the spa/pool circuits. In this case the heater was still associated with both pool & spa circuits but it didn’t get power at all.

Folks - I upgraded my IntelliCenter to 3.004 today and was not able to turn on the heater for either the Spa or Pool. After I figured out how to switch back to 1.064 it started to work again. My setup is all Pentair - so I've a MasterTemp. The heater showed configured on both the latest...

Didn't realize that I had to re-set both home positions. Not of this Pentair is logical .... Anyway - got it done and now let's see if the Spa level will go down.

I was able to create the Spillway circuit and schedule. I'm struggling with reprogramming the IntelliValve. If I follow the instructions on the valve it keeps going back to 20 vs the 24 I saved as the new position. Any tips ? Have not been able to find any re-programming videos or articles.

Perfect - thanks again ajw22! I'll get this setup and report back, might be a couple of days, we finally have some rain in SoCal. and my cover is closed.

Did a bit of research -- should I upgrade my IntelliCenter to 3.002 or stay with 1.064 to have the spillway circuit work ? I see it's been released in January, and their last release was pretty bad.

Let me give this a shot - thank you very much. One question - I see that there's a spillway option in the Feature Circuits - if I set this up do I have to program the vales or does the Intellicenter know the valve settings based on the Spillway Circuit ?

Here are the pics. Pool equipment Pool mode Suction Return Spa mode Suction...

I'll send a high res picture tomorrow. I've have an Intellicenter and 2 Intellivalves. Do I need to make pics with the pool in Spa mode ? My equipment - heater/filter/pumps/valves are like 4-6 feet below water level.

I'll send some pics tomorrow during day light.