Recent content by Hemmekefamily

We just did this on a 30 ft round, it was part of the electrical inspection, my husband is an electrician and had everything done for inspection other than to run a copper wire all the way around the pool and attach it to the pump. Simple but necessary. It is code....:) Aqualeader AG round...

We are on day 3 of the conversion. It is going well, pool is really clear and I tested the OCLT this morning, but it dropped 3 fc. So I will test again tomorrow morning. Here are pictures of the pool yesterday and when we started Aqualeader AG round 30', 21,200 gals, Hayward sand filter...

Ok, we started the conversion. Ph was 6.8 so I upped it to 7.5 with borax. FC has been staying at 15 for the last 2 hours. So I just keep testing every hour right? Thanks again for your help. Aqualeader AG round 30', 21,200 gals, Hayward sand filter, Hayward 1.5 hp pump, TF100 test kit,

We are starting to finish filling the pool. Once full I will start the pump and check ph and fix that and start the conversion to chlorine, is that correct. Having the fc that high will not bleach the new liner will it? Thanks for your help and I am sure I will have more question, once I...

Ok, just to double check. We are putting a new liner in, new water, new hoses to filter and pump and changing the sand in the filter. We will scrub the ladder and mat down. No water from before will be used in the new liner. Do I have to do a full conversion with the fc at 15 or can I just...

Thank you, so much for your help. [emoji4] Sent from my iPad using Tapatalk

Okay thank you so much, so when we refill the water then I will test ph and then fix that and then bring the chlorine level up with the bleach to 15 ppm and brush the sides and bottom of the pool to get the bacqau, I will do this when the water is emptying also, as much as I can. With...

Sounds great, thank you for clarifying. I will look over the article once again and I most likely will have more questions once we do it. Thank u so much. Sent from my iPad using Tapatalk

I already purchased the sand, do I have to do a full bacquacil conversion if I empty water and change sand? I was just planning on doing the water change and changing the sand and then slamming it. We have only had bacquacil for a little over a month. Sent from my SM-G900V using Tapatalk

Also when I put the stabilizer in, do I put it in the skimmer with a pool sock? Sent from my iPad using Tapatalk

Hi again, I ordered the test kit TF 100 xl with speed stirrer, to get ready for the pool drain and fill, hopefully should be happening next week. So here is my question, I change my media, sand, after the pool is empty, right? Next question, when I slam it, do I need to have add stabilizer...

No it will be empty just overnight. Thank u, I was assuming I would have to SLAM. Thank u. Sent from my SM-G900V using Tapatalk

Ok, update. The pool has to be drained because our pool has two uprights that are not right. We have to drain the pool and then they r going to fix the uprights and put a new liner in. So here is my question. Once the pool water is drained, and I change the sand what is the next steps, do I...

I will do that. I did speak with the manager and he was supposed to send me a service ticket with the info, but did not yet. It is a lot better. We will be switching from Bacquacil to the BBB method when we get the new liner, so I am sure I will be on here asking a ton of questions. Thanks...

Thank u, the uprights are much better now. We do have one that is still upright that is not right. The pool company is going to come back in the fall to drain and fix the upright and put a new line in. :) thank u for all your help. Sent from my SM-G900V using Tapatalk