Recent content by gratefulmjc

Hi @kdrob. Several years ago, when I got tired of spending the $$$ for replacement Valve Modules and telling myself there must be a way to repair them, I poked around the internet but didn't find any replacement parts. Curious after reading your post, I poked around again and saw this on eBay...

C. In order to press the Impeller Gear completely onto the Impeller Shaft, I set the Valve Module on its side and used a screwdriver against the root of one of the blades of the Impeller to keep the Impeller Shaft from moving downward while I pressed downward with the ball of my thumb on the...

7. I removed the remaining three components in the Valve Chamber by simply taking them out. First the Bellows Cap. Then the Valve Head (note the Valve Head has to be rotated to the proper orientation in order to remove it from the Valve Module...from the bottom). Lastly the Bellows. The...

4. I removed the Gear Table Disk by simply lifting it off the Impeller Shaft and, without disturbing the gears, placed it out of the way to avoid knocking it over and scattering the gears during the following steps. 5. I removed the Valve Chamber Cap from the problematic Valve Chamber by...