Recent content by FLJones

Just saw this after I posted that I'd replaced the transceiver board. I would be interested if you could repair the board, maybe the main control board too is worth looking at? I'll look to see how to send you a PM on this site. Right now though I'm back off to the pool shed with a shop vac and...

Thanks again for your help. I bought a replacement used board on eBay for $150 and it works fine. I've kept the old one and maybe I'll try putting a new comm chip on it using the soldering advice. For now though I'm content after having spent a lot of time figuring out the main control board and...

Thanks for the details. On the Multimeter DC 10A setting I got 0.14 amps. On the Multimeter 200mA setting got 165 to 180mA. The longer I left it connected the higher it read. i.e. it started at 165 and just kept going up. If I did this correctly my readings tell me that the comm chip is blown...

The 485 led does not light at all. The fact the the RF led is blinking is strange because there is no connection between the remote and the tranceiver and this makes me think something is very messed up with the transceiver. Screenlogic is not involved and there is nothing else connected to the...

I just replaced my Easytouch main control board part# 520712 as the old one was not working due to a power surge (I think). Now I cannot get any connection between my main Easytouch control board and my remote. My remote fcc id is a P4HEASYTOUCH. When I sync the main board to the remote the main...

When I power the controller on, the panel displays correctly. If I quickly press the F-Filter Pump button it clicks and lights Red, same for control buttons. i.e. they work properly. However within maybe 10 seconds it clicks off again and the panel display gradually fades to display nothing...