Recent content by fallsdeep130

Jerryt, I got my relay in today and feel like I got close, but no cigar. I am trying to use and aux relay instead of the "aux extra" circuit because I thought that would be easier. I never got the RiB relay to swap. I had 24v on the NC wires before pushing aux 1. Then I push aux 1 and I got like...

Jerryt, thanks for the help. I did end replacing the transceiver board and it works great. I guess I got a bad one right out of the box. I did notice my new board has like a built in antenna, where the original board had a screw on antenna. Maybe it was wrong one somehow I don know. It was...

I will look at part number when I get home. Yes, I used that exact procedure and the remote just keeps trying to link up the address. Never locks on and starts working. Its like it doesnt see the transceiver or something, but before I say the board is bad I wanted to know if there was a...

Sticky, how did this work out for you?

Jerry, Thanks for the help. Have you or know anyone who has had success with operating a actuator from the solar output this way? This would be great if it works out. I really need this 3rd actuator. Thanks again.

????

I have honestly tried everything I can think of. I wrapped antenna in tin foil. no help. I moved off the stucco wall, no help. I can't get this thing to lock on an address. the Pentair tech support was no help all. Is there anything I can look for like flashing lights on the transceiver board or...

I have read several threads about the easytouch and can't find anything specific to my needs, so I decided to ask in a thread. I see that the solar option can also be used as "aux extra". I want to use this for another actuator, but I see it only has a two pin connection and my actuators have 3...

Ok. Thanks for the info. My walls are stucco, but it seems that everyone mounts there anyway. I will try that. Thanks everyone Sent from my iPhone using Tapatalk

Hi, I am currently trying to install my easytouch 4 automation system. The load center is mounted and powered up. Now I am attempting to install the wireless transceiver and the directions say not to install directly to load center or on a stucco wall and be at least 5 feet away due to...

They came back today and put the anchors through through to the footer. They said the short ones was only to hold in place. They put the long ones by every post. I feel better about that anyway. Thanks for all the help Sent from my iPhone using Tapatalk

Hi, I am currently under day one of my pool enclosure construction. I have pavers and I noticed they are not anchoring the enclosure all the way through my pavers and into the footer like I thought would happen. It is only anchored with tap-cons to the pavers. Is this common practice or should...

I've been told by several people that Heliocol is the best brand. Check it out and see what you think

I would call and talk to the Pentair lighting guy at their tech support if you want optimal placement or exact light distribution angles. I have personally seen them in a deep end of a pool about 8' deep and they were installed about 12" below the water line. It looked fine to me, but the...

This was sent to me from a person who has two globrites in a 17x39 pool. I think it is not quite enough light for this size pool, but anything smaller would look just fine in my opinion.[attachment=0:1ntibtkd]17 X 39 2 GlowBrights.JPG[/attachment:1ntibtkd]