Evo-L's latest activity
-
EEvo-L reacted to Sampo's post in the thread A brief experimental confirmation of pump RPM, flow, and current (cost) relationships with
Like.
I’m a longtime lurking reader of TFP who has recently decided to start posting (my intro is here). Thus, I thought that I’d share a tiny... -
EEvo-L reacted to Katygreys's post in the thread Can I fill the pool by adding water to return lines? with Like.
If you have a sprinkler system and an extra zone available…
-
EEvo-L reacted to ScudBar61's post in the thread Can I fill the pool by adding water to return lines? with Like.
I have something like you’re talking about. I have a PVC line running from a hose bib through a sprinkler valve, then a check valve and...
-
EEvo-L reacted to ajw22's post in the thread Can I fill the pool by adding water to return lines? with Like.
You must have a Back Flow Preventer - Further Reading when you connect a non-potable water source to potable water.
-
EEvo-L reacted to AQUA~HOLICS's post in the thread Can I fill the pool by adding water to return lines? with Like.
You will want to have a back flow restrictor to prevent water from the pool entering your domestic water system.
-
EEvo-L posted the thread Can I fill the pool by adding water to return lines? in Pumps, Filters, and Plumbing.Hello TFP, I am trying to find a way to add a manual water filler to my pool, without dragging the hose out. I am thinking of running...
-
EEvo-L replied to the thread New Install Q- Aqualink RS not turning Heat Pump on/off - Wiring Photo.Thanks everyone. I was able to get the correct dip switches set correctly and learned how heat pumps operate. I now will keep the pool...
-
EEvo-L reacted to MSchutzer's post in the thread New Install Q- Aqualink RS not turning Heat Pump on/off - Wiring Photo with Like.
Just one more thing to add, please do power cycle the RS main board after you reset those DIP switches. Their states are likely only...
-
EEvo-L reacted to PoolGate's post in the thread New Install Q- Aqualink RS not turning Heat Pump on/off - Wiring Photo with Like.
If you do not have a temp gauge because he used the solar temp leads, I believe this is your problem. In this case you should be getting...
-
EEvo-L replied to the thread New Install Q- Aqualink RS not turning Heat Pump on/off - Wiring Photo.Thanks so much. I will look into all of this now. Its as clear as mud haha.
-
EEvo-L reacted to ajw22's post in the thread New Install Q- Aqualink RS not turning Heat Pump on/off - Wiring Photo with Like.
Let’s agree on some terminology… The HP can be ON or OFF. When OFF the HP will not run regardless of water temperature. The HP can be...
-
EEvo-L reacted to ajw22's post in the thread New Install Q- Aqualink RS not turning Heat Pump on/off - Wiring Photo with Like.
Read pages 20 & 21 in...
-
EEvo-L reacted to MSchutzer's post in the thread New Install Q- Aqualink RS not turning Heat Pump on/off - Wiring Photo with Like.
The first thing that I would check is the DIP switch settings on main panel RS board. See below: DIP switch 1 position 8 tells the...
-
EEvo-L reacted to ajw22's post in the thread New Install Q- Aqualink RS not turning Heat Pump on/off - Wiring Photo with Like.
Did you power the Aqualink system off and on before and after you changed the dip switches? Pentair EasyTouch and IntelliCenter systems...
-
EEvo-L reacted to ajw22's post in the thread New Install Q- Aqualink RS not turning Heat Pump on/off - Wiring Photo with Like.
Make a warranty claim with Jandy. Have the installer call Jandy Support with you on the line. Since the HP has never worked since...