Recent content by EmeraldCoastBuzz

Re: No power to pump Looks like the first in/out pair of the relay was bad. The second pair worked. I swapped the pump relay with the relay for the lights (same relay type) since the lights only need one pair. Everything working again! Note I originally replaced the 5841YN chip on the board...

Re: No power to pump When power is disconnected to relay and control is on, the reading between load in post 1 and load out post 2 is a null value on my multimeter. Reading between load in post 3 and load out post 4 is 0.4. Ohmmeter is set to 200. When filter switch is off both sets are a...

Re: No power to pump When I disconnect the connector from the two top posts of the relay to the control board, I measure 348 across the two top posts. When I connect it and the filter button is on, I measure nothing. When I connect it and the filter button is off, I measure 348.

Re: No power to pump Yes, Sir. You have it right. I took some pictures but doesn't look like I can upload them. From left to right on the relay, posts 1 and 3 (load in) measure 240. Posts 2 and 4 measure 0. Yet post 2 and neutral shows 120 as does post 4 and neutral. Just to clarify, you...

Re: No power to pump Here is what I verified this morning. Power coming from the breaker to the relay is 240v across red and black load in. When I hit the filter button on the remote, the relay does trigger on off and regulates any power coming out. That being said, when it is on, the power...

Re: No power to pump Appreciate the reply and apologize for the delay in responding. I checked the circuit board and one of the shift registers was burned out. I replaced it today and I am now getting power out of the relay. However, the darn pump still won't come on. I bypassed the circuit...

Apologize if this is in the wrong section... Suddenly I am not receiving any power to my pump and I was hoping to get some ideas from the forum. I could not find anything after searching for a few nights. I have an aqua logic control board. A few months ago I received the No Cell Power...