D
Report

dldeuce

Active member From Houston TX
Messages
32
Media
18
Featured content
0
Reaction score
10
Points
0
Joined
Last seen
Follow
Start conversation

Latest activity Postings Media About

    • D
      dldeuce replied to the thread Jandy pump failure.
      Thanks everyone for your help. I had some trouble getting it to prime, but final poured in enough water to get it to go.
      • IMG_3345.jpeg
    • D
      dldeuce added the media item IMG_3345.jpeg to Pool Equipment.
      IMG_3345.jpeg
    • D
      dldeuce replied to the thread Jandy pump failure.
      Thanks. I got it off. Got it in my head it was reverse threaded. A soft leather belt helped get a better grip
    • D
      dldeuce replied to the thread Jandy pump failure.
      I've got the new motor, but now I'm having trouble getting the impellor off the old one. I just tightened that hand tight. I that...
    • D
      dldeuce reacted to JamesW's post in the thread Jandy pump failure with Like Like.
      I missed this part. The motor is pretty much done.
    • D
      dldeuce replied to the thread Jandy pump failure.
      The wiring is a little better than maybe what the picture shows, but yeah. Looks like that wire terminal is designed for solid wire...
    • D
      dldeuce replied to the thread Jandy pump failure.
      I connected the capacitor wires together. There are two wires connected to terminal A & B. I left those connected. It's still an open...
    • D
      dldeuce replied to the thread Jandy pump failure.
      I thought there were heat protection switches. What you're showing there is just straight up bare wire. It's weird. Yesterday it was...
    • D
      dldeuce replied to the thread Jandy pump failure.
      open
    • D
      dldeuce replied to the thread Jandy pump failure.
      Two black wires coming from the relay and the green ground wire. I cleaned up those connections a bit, but still nothing.
    • D
      dldeuce replied to the thread Jandy pump failure.
      • IMG_3338.jpeg
    • D
      dldeuce added the media item IMG_3338.jpeg to Pool Equipment.
      IMG_3338.jpeg
    • D
      dldeuce replied to the thread Jandy pump failure.
      I've re-assembled it all. Now it's doing nothing at all. It's got 240V at the input terminals. Zero voltage at the capacitor. Is...
    • D
      dldeuce replied to the thread Jandy pump failure.
      Thank you very much for that. The impellor unscrewed pretty easily, and the screw does reverse thread into the shaft. I thought the...
    • D
      dldeuce replied to the thread Jandy pump failure.
      How do I take this apart to get a better look at what's going on? I can't seem to take apart the impellor housing. I can't seem to...
      • image2.jpeg
      • image1 (1).jpeg
    Show older items
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back