Recent content by DBswim

So after all the fighting with water chemistry it turns out that I didnt have enough DE in the darn thing!! I kept adding only 6 cups of DE... I needed 6LBS!!!!

Thank you for the needed advice!! Will update on Friday or Sat with psi readings. I use liq chlorine and a tab floater. Half gal and tabs will last about 2 weeks.

So I cheaped out!! I promise I will not cheap out when it really matters. BUT I got some "cheap" Varify test strips for about $20. I wanted to see if the chemistry may indeed be a problem. I had 0 CYA and 0 free chlorine. Two days ago I added 3.5LBS of CYA into the scimmer, about one pound...

The guage does go all the way down when syst is off. Water looks crispy clear. When psi gets high I open filter the grids are not very dirty at all. Although do rinse them. I only need to backwash for about 5-10 secs for psi to go down to normal.

DE filter... water is clear. New pool, only 3 months old.

My Hayward filter PSI keeps going from 13 PSI to about 30 PSI in about 3-4 days of about 5hrs of filtering per day. I have cleaned the grids and backwashed the filter. The equip is new. There is no air bubble in the VS950 pump. No air bubbles coming out the returns. The water level in pool is...

Thnx for the manual link. I can control the pump from the pump's panel but I need to be able to control the pump from the Omnilogic if not the Omnilogic is almost useless.

Yes, powered down both at the breaker for about 2-3 min.

Hello, we have a new 950VS with the Omnilogic automation system. All was working fine until we had a power outage. When the power came on the VS950 was no longer being recognized by the Omnilogic. The Hayward Unique Address (HUA) of the pump is not transmitting to the control unit. I can...