Recent content by davidrod4

Moved from HERE @russ0486 , my old one-speed pump is finally dying on me, and I am debating converting to SWG doing this exact setup for our vinyl 30k gallon pool. We just have a 3-way valve with main drain and two skimmers, and the booster pump for the Polaris (our pool light is manual too)...

That is good to hear. We did use some oil-based enamel paint that was recommended here for the coping so hopefully it lasts. Easy enough job to recoat it if not. How long have you had the RJ60? I assume you are happy with it?

Ah, we just got the liner done about a month ago. So I assume you mean it will likely have less salt than before? Only thing we've added since is CYA, bleach, and some Borax.

Thanks for the reply- the kit arrives tomorrow! Will reply once we have the results.

Hello TFP members, We are looking to add a SWG to our Vinyl 27k gallon pool. It was built in '95, so we aren't totally familiar with the background, but we had the liner replaced when we moved in recently. I have attached a picture. A few concerns I have: 1. The coping is aluminum (I...

Thank you both for the info. I'll start with some fill dirt and take it from there, I just wanted to make sure I was ahead of it before it gets worse. I'll have to think about how to best stop that hill from shifting any more, our plan was to cover it in rocks this summer.

We moved into a home that has a 20 year old vinyl pool with a concrete slab encircling it. On one side of the pool the slab ends at a small hill, and there has been some erosion leaving a small gap underneath (about 10 feet long, 1-2 inches thick). I have heard of mudjacking or foam injection...