cznkane's latest activity
-
Maytronics Dolphin has cordless robots, there is a reason they are number 1. -
The Betta skimmer is fantastic. One of the best things I have ever bought for my pool. The only problem with it is that you can't leave...
-
cznkane replied to the thread Aiper Seagull Pro died...again.Bump, been looking at the betta skimmer
-
cznkane replied to the thread CYA Oddly Low / C3 Tablets.Thank you! I knew that was in the app somewhere, was looking at the CYA card and didn't see it. My plan (hope) was to use the tablets...
-
Closed the pool at the end of last season with about 50 CYA. Drained maybe 25% of the water as part of my winterization. Refilled and...
-
cznkane replied to the thread Aiper Seagull Pro Review.Terrible...mine has died multiple times. Talking to Aiper now about a full refund.
-
Have had the Seagull Pro for one full season and it has died for the second time. First time was the batteries, second time the rotary...
-
cznkane replied to the thread Looking to add SWG to existing pool - help selecting equipment.No doubt :LOL:
-
cznkane reacted to Newdude's post in the thread Looking to add SWG to existing pool - help selecting equipment with
Haha.
My Pentair SWG says directly on the cell itself to acid wash it every 3 months. I have effectively zero calcium and low TA. It has... -
cznkane replied to the thread Looking to add SWG to existing pool - help selecting equipment.Good point. The Circupool manual says it's perfectly acceptable to power it 24/7 and rely on the flow switch to regulate generation on /...
-
If looking at the Circupol - look at the RJ45+ price and the (presently) $10 upgrade to the RJ60+. With a 17k pool in PHX, you'd be best...
-
The SWG should be connected to the Load Terminals of the Filter Pump Relay.
-
I found a suitable case at my local Harbor Freight. it's not as nice as the other case but it works.
-
I just yesterday noticed my Dad's coping saw hanging over the work bench. I'm pretty sure the last/only time it was used was fine...
-
cznkane replied to the thread Setting run time for Circupool RJ60+ with VS Pump..Exactly how mine is set up