Recent content by crusemm

I've had pressure side before, it was a bigger hassle than the robot. The extra pump uses a ton of energy, the cleaners are more complicated than the robots, and easier to break, and cleaning the filters isn't any easier than the robot.

I previously had a Dolphin, it lasted about 5 years, then one of the motors died, tried to rebuild it but it wasn't worth the effort. Purchased an EVO 614 last year, and I'm very happy with it.

Added a full bottle to a much smaller spa, has not stopped my leak. I'll know for sure in the morning. I Isolated my spa, bypassed my DE filter with the grids removed just in case. Added a Half bottle of Fix-A-Leak, and ran pump on high for approximately 12 hours. Turned pump off and let sit...

Anybody have any info on plugging these fittings?

Okay, so the next issue in my quest to salvage my spa plaster. I tried plugging the return lines in my sp, and for the regular eyeballs, I can get winterizing plugs. But the massaging jets are another matter. They appear to be Hydroair Micro'ssage jets. I can pull the entire jet assembly out...

More photos

Before I try to reconfigure piping, I might try Fix-A-Leak, need to do some more research.