Recent content by CraigF

Checked continuity for crossover now. No luck , just straight thru no crossover. Scouting a working local display since substituting the remote for the local didn't work. I guess maybe they flash the locals and remotes with different firmware even though other than color they appear to be the...

Just replaced the PCB with same error. Only thing left is the local display. I was hoping that since the remote and local were the same part number they'd be interchangeable, but perhaps not since the error stuck around. Didn't upgrade since house is about to list and just trying to take...

Still got errors. Tested continuity on ribbon cable. All good. Put in new (refurb) PCB-Main. Same error. With local and remote plugged in I get a Comm error 2 on local and a Comm error 1 on remote. With comm block removed I get Comm error 2 on local and (of course) nothing on remote. With...

Suddenly getting the dreaded Communication Error 2. Tried power reset with no change. The model number and connections on my white wall display appears to be the same as my local black display. Can I simply swap them to test? (My system is working with all blocks removed, I just can't...

Thanks. That's what I was afraid of. I've got the threaded pieces, just not the tailpiece since it's glued into the PVC. Just didn't know if it was more universal than the threaded pieces. I'll try epoxy on the cracked PVC while I wait for the Jandy replacement.

Having to replace the plumbing from new pump to filter (Jandy CV460). Is the tailpiece on the old Jandy filter union compatible with something else? (sorry, probably a stupid question). Just trying to to avoid having to replace with the Jandy half-union part since it's painfully slow to get...

Thanks for the input. Sorry, forgot the heater. Looks like the pool was originally built by Blue Haven and the heater is a Hayward SmartTherm 400,000 BTU.

20,000 gallon PebbleTec pool w/spa. Aqua Logic PS-8 with very rusted enclosure (but working) software revision 2.91, RF remote board but no RF remotes, wired controller inside house, wired spaside control (doesn't work but recently bought replacement to install), Pentair Superflo pump, unknown...

We've bought a home where the prior homeowner somewhat neglected maintenance. The controller is an Aqua Logic where the enclosure is rusted out on the bottom (the ground bar completely fell apart...I replaced the bar but box is toast). Went to replace 120V pool light, fixture rusted out. Spa...