Recent content by ChrisCor

  1. C

    Spa air flow issues

    I only had to clean the threads and tighten the jets fully.
  2. C

    Spa air flow issues

    We do run the spa a lot without the blower. We only run the blower when you want hard pressure from the jets. I get some cramps around my right shoulder blade and it really feels good to get in the warm water with the blower on to concentrate in that area. so if your having issues it could be...
  3. C

    Spa air flow issues

    Yeah I figured it out. My 5 Venturi jets (one pictured above) were not seated all the way due to some plaster in the grooves. This caused them not to function correctly. There were no clogs or blockages bout my jets if not screwed all the way in allow the water to flow up the air channel and out...
  4. C

    Spa air flow issues

    Why do I have 1 Venturi and 5 of the others I sent a pic of? Is that standard? The others are easy to remove. I am looking around the Internet for the one I have to figure out how to take it out but it is my Venturi that has the best flow and act like it did before the remodeling.
  5. C

    Spa air flow issues

    Guess I need to call my remodelers back out. Now the small nozzle inside the bigger nozzle is loose and wobbling further back in the hole. But it did not loosen the bigger nozzle at all and I don't see a way to re tighten the smaller nozzle. :( Would my one be different style since it is from...
  6. C

    Spa air flow issues

    I do get water from all jets. Here is a pic with the 5 I can remove. The one they are on top off I can't figure out how to remove. I have reached in with pliers and turned the jet with no luck. Can't upload new photo but it looks a lot like photo one but with some more action from each jet.
  7. C

    Spa air flow issues

    Just went out to take some photos. 1. Air blower on but water pump not on. Notice all 6 jets have air. 2. Water pump on and now air only from 2 jets. 3. Jet I removed from let side of spa. 4. Now water and air from 4 jets. 2 original, the one I removed and one that I did not change on bottom...
  8. image.jpg

    image.jpg

  9. image.jpg

    image.jpg

  10. image.jpg

    image.jpg

  11. C

    Spa air flow issues

    Just had my pool and spa resurfaced and tiled. They removed the special spa jets during the process and now I have noticed a few issues which I have never had in the last 16 years. 1. Water backed out the blowe tub so hard it blew the blower off the pipe. This has happened about 3 times in the...
  12. C

    ChrisCor

    howdy, this is is chris from Houston. We have had our pool 16 years and love it. Just had the plaster changed and now have some spa issues. I look forward to a little help.