Recent content by cherrybeard

  1. C

    Help diagnosing pump problem

    Thanks James. I did eventually find the same info you posted. I also broke the pump even more by running it on full speed for ten minutes during my inexperienced diagnosis tests. It made a clattering sound, then tripped the breaker at the fuse box inside the house. I’m ordering a replacement...
  2. C

    Help diagnosing pump problem

    Gutted. New capacitors, refill tub, all seems ok. Till the pump overheated and switched off until it cooled down (10mins or so). Don’t think I can buy the exact model again (8 years old) so may be in for pipework re-alignment too :(
  3. C

    Help diagnosing pump problem

    Ok so new capacitors and tester arrived so I ran around like a child with a new toy and results are as follows. Old 45uf cap = 27 New 45uf cap = 44.1 Old 20uf cap = 8.7 New 20uf cap = 19.4 How the motor ever started I don’t know but I’m hoping this is the cause of the motor overheating and...
  4. C

    Help diagnosing pump problem

    Also bought a capacitor tester as my multimeter won’t cut it. In the same package as the new capacitors though!
  5. C

    Help diagnosing pump problem

    Last night I bought two new capacitors, a 45uf and a 20uf to match the old ones. Should be here in a few days, could be the solution, who knows.
  6. C

    Help diagnosing pump problem

    Hi everyone. Please help me with my problem. See pictures for specs. It seems as if the pump is overheating and shutting down after a few minutes. Sometimes (not often) it hums without powering up but will run if I turn on speed 2 and then select speed 1 (which suggests a capacitor issue). i...
  7. IMG_1835.jpeg

    IMG_1835.jpeg

  8. IMG_1837.jpeg

    IMG_1837.jpeg

  9. IMG_1928.jpeg

    IMG_1928.jpeg

  10. IMG_1929.jpeg

    IMG_1929.jpeg