Recent content by cfvilleg

Thanks for the quick reply. Will order the relay right away. Please excuse the dumb question but for the breaker, I found this --> https://www.amazon.com/Siemens-Q22020CT2-20-Amp-Circuit-Breaker/dp/B000VYOT9S not GFI but a closer match? I can't tell but aren't 2 of the breakers tied...

Can someone help me figure out what relay I need to order to replace the pump filter one that burned out (see pic)? Also I would like to replace the breaker attached to it. The ones I found do not have the metal bar. Is that needed? Or can I order a standard Siemens double pole 20amp breaker? If...

Yep, it worked. Thanks for all the help !!!!

I agree now that I look at it more closely. Red is tied together and therefore common. This was wired originally by the installer for single speed pump. I inherited the pool and replaced the old pump with a new 2 speed pump. So based on your wiring I should connect the controller to terminal...

AUX1 seems wired for low speed and configured as such on the controller. The pump does run on low speed, but I need to use service mode. I configured the controller for a 2 speed pump and enable low speed on heater 1 so not sure what I am missing. I just posted the wiring connection on the...

I have 2 speed Tris Star Hayward pump wired and configured for high and low speed operation. However, when I click on low speed button on the controller the pump does not respond. Also, if I click on filter once the high speed works, but when I click the second time to engage low speed the...