Recent content by CB9742

I have the iAquaLink 3.0 and the JEP-R. I’m not sure why it’s hooked up this way, but I can’t control the speed of the VSP with auqalink.

I’m not sure if it’s always been that way, or if something happened during the freeze. When the pool is on, the valve is in “off” position to the spa return, so there’s no spillover.

Yes sir

Sorry, I suck at explaining things. Before our recent freeze, my spa would spillover into the pool. Now the level in the spa just remains the same and never spills over.

I have the Jandy JEP-R Controller. I’m currently in the regular pool mode, and the spa maintains the same level, never spills over. The valves rotate when I change modes, so they’re not stuck. I had to change it to spa fill to get water back in the spa.

Should this vale be partially open while in pool mode? its set to off right now.

Haha yes, yes you do. Thanks, I added it.

My pool has been in freeze protection for the last couple days. When I came home today, the spa was almost empty. Can anyone help me with confirming valves are positioned correctly? My spa has a spill over and normally runs into the pool during normal operation. Thanks in advance.

It is normal, it’s just ground water coming through. Once you fill the pool with water, you wont have the seepage issue you’re seeing now.

I hadn't noticed any water loss in the spa over the past couple of weeks. The water is pretty choppy right now because of the wind, so it's hard to tell if the spa is now losing water.

Thanks in advance for any help! We're going on about a month now of having our pool. I noticed I was losing approx 1/2'' per day of water, which I felt was excessive. I live in Texas, this weekend we had temps drop down to around 10 degrees for a couple of days. Everything was on freeze...

Nope, but I am pretty sure I figured out where it came from though. There was rust in the polaris in-line filter.