Recent content by CanadaDave

Hello, Trouble Free Pool'ers! For those of you who have been around for a little while, I moved into a home in 2014 with my first ever pool. It's an older, massive in-ground concrete job. Anyway, the pool has come with a Sta-Rite 400NA heater which has been tons of fun. :) Background thread...

Hi all - sorry for the delay. I used to use strips, but found them unreliable, so I take my samples to the pool shop for testing. Most recent results (2 days ago): 0.0 fc 1.0 tc 7.4 ph 3200 salt 28 stabilizer (I added a box after the test) I had a test done a week prior and it showed 0 free...

Hey - thank you as well, f3justusc - you saved me $200 with that "return to Amazon" idea! Without that, I'd have replaced the control board needlessly.

Just a quick update: I've ordered the manifold bypass as well as two really neat brushes that look like they will do a great job. They're meant for cleaning aquarium pipes, and they have springs on the end instead of hard steel. I ordered one with stiff bristles and one with soft bristles, and...

Hi all, I have a Pool Pilot Digital with an RC-5 salt cell. I'm unfortunately making 0 chlorine even in Boost mode. Unsure of the age of the components as I've only been in the house for just over a year. Visual inspection of the salt cell shows things are clean - no build-up. I did a cell...

Just a quick update: The bypass has been ordered and will arrive in a few days. My local dealer doesn't stock it and wanted $74 (!) plus 2 weeks to get it in, so Amazon got the business for $30 USD and 3 days shipping. Hate like heck to not support local businesses where I can, but the local...

Nope... the pump is a 1.5hp single speed Sta-Rite.. The system runs at 21-22 PSI when the filters are clean, and around 25 when the filter is really dirty... except for when I have the system set 100% to the spa, and then it runs at around 30 PSI, as there's only one outlet for water in the...

Nope, darn. She just died out again after about 45 minutes. Noise still... some chunking/banging after a while, and then "Service Heater" with AGS light underneath. Hm. So, let me recap what I've done so far, and what I have not done. Maybe there's something that I'm missing, here: - AGS...

Hey everyone! Just checking back in... at long last, I had the opportunity to take the thing apart. It's cramped working in there, so it takes a fair bit of time. When I squirted water into the nozzles, there wasn't much of anything in there, but there may have been some sediment in the two...

Today's the day - I'll be taking the bugger apart after work. Is there a "proper" technique for cleaning them out? Should I try and get a small brush (stiff wire / soft wire / etc) and use that to clean the tubes, or am I best off just using a garden hose with a spray nozzle? Last thing in...

OH - sorry - you were asking about the regulator, not the bypass. It looked good, but it had that wrap tied around it so it wasn't moving freely. I did replace the regulator and spring 2 months ago... when I moved in, there was no regulator in there at all!

Thanks a lot, Paul - I appreciate the reply! When I took the manifold off, the thermo regulator had that filter tie all wrapped around it. I took that off, but it seemed to work just fine and I couldn't see any breaks or anything. In addition to the two pictures above, I have these two that...

So - control board received... though an interesting thing happened. My wife wanted to use the spa, so I turned the heater on (have not yet replaced the board). Ran for around an hour, then the heater gave the clunking noise again and died out, AGS light. I thought this was meaningful as I...