Recent content by bucadam

Can someone please give me the directions on doing a fc/tc/cc.I lost my water proof sheet:D

My son told me later in the day on the 25th he added more chlorine without notifying me and that made the fc really high was at 24.So i have been just running filter 24 hours a day,cleaning filters regularly and brushing the sides, checking FC and it went down and now my raedings are as follow...

when i started the slamming process MY ph was at 7.6 but i did not check anything else until two days after starting slam and i had to add baking soda and stabiler while slamming,so I am thinking PH could be low at this point and that is why water is cloudy.Am I on right track Right now...

I have a SWG now and wondering if there are any negatives of converting to chlorine.

how would i test it.

I have aqua rite swg and when I remove fuse and wait for a minute and reinstall the fuse the swg will run fine and then a couple hours later i will check and system will have PCB error.I installed new limiter already a month ago

Yes I am starting to see some improvement.Thanks to all who have been helping.I am going to become at least a Silver supporter on payday.When do I go back and turn on my SWG

This evening ar 8;15ppm FC--19 CC-.5 TC--19.5 TA--120 CYA--60 Will be adding 2 plus gals of liquid Chlorine

last night FC---22 CC---1 TC----23 CH---150 CYA---50 TA===120 Added liquid chlorine as per pool math.This morning FC--16 CC--0 RC--16 CYA---60 PH--7.3 Will be adding 2plus gallons of liquid chlorine.I do not see any improvement in cloudyness. Could it be metal particles

CYA is 60.I will test again in about an hour and post all results

i started slamming and last night FC was 35 at 10 pm and this morning at 8;30 FC was at 22.Added more chlorine as per pool math.Pool water is still about the same cloudy color,Just a question could the cloudy color be coming from anything else besides algae.

i only had 4 gallons of 10% to put in tonight.Will take readings in the morning and continue to slam.I can see the bottom at the deep end very faintly

ok I have my new TF-100 test kit and did my readings and here they are.I am going to start slamming pool on Sunday but need to use my pool on Saturday for a bunch of Girl Scouts.What can or should i do.My water is cloudy.No visible signs of algae.My salt system is off.Thank you in advance...

should I just turn SWG off or not add LC.I was reading alot about the slamming and may know the answer but just wanted to be sure.I should turn off SWG correct and not turn on until slam in done right.The correct way to turn off SWG is by the slide switch,Do I have to unplug cord from lower...

i will order that right now.Can i or should I add any Liquid Chlorine tonight to get started while waiting on it to be delivered