Recent content by brunnesa

The pool is 13,594 gallons. My pool always uses around 7 to 8 ppm of chlorine in the peak of summer, so I wanted to make sure it would cover that easily. I will put the SWCG on a separate timer if I cannot get the chlorine output needed during my pump run times. Just run it shorter times...

That makes sense. Thanks for that info.

Interesting. It does not have a timer in it, so how does it relate the output to time?

I usually run my pump on about 1200 RPM for most of the day, and I know it will generate chlorine at that RPM, so I will just match the SWCG to that. Thanks.

I just purchased a Circupool RJ 60+ and I have a question about the best way to operate. Is it better to run it longer duration at a lower power or higher power for a shorter duration? I know I need to generate x amount of chlorine and can get there either way. Thanks

I thought about that, so I put a thermometer inside to see the temperature difference between outside and inside. When it was 112 degrees outside here it was 117 inside. I do run my VS pump on low rpm most of the time and the lid on the shed does have a small gap on the sides.

Water is great! It’s had water in it for over a month now. Enjoying my trouble free pool!

After two months of working on this pool in my spare time, I am finally done! Thanks to all who helped answer questions along the way.

I love it! Very nice looking pool.

Trevi makes a pool that is saltwater compatible. I do not think it is made any better than the resin Doughboy that I also looked at, but Trevi says you can run a saltwater system on some of their pools without voiding the warranty. Here is the pool I have that salt water compatible.

Here is mine. We get very hot here in Oklahoma also and I have not had an issue yet. It was 113 degrees here a few days ago.