Recent content by Brownpow121

Got it. Upped the Swcg to 50. Added liquid chlorine as well. Pool has been crystal clear since I added liquid chlorine a week ago. Cloudiness gone. Will run at these levels and do overnight test a couple times this week to get better data and come back. Thank you.

It runs 8am-4pm

Ahh. Sorry. I’ll run the second oclt then come back. My SWG runs at 20 for 8hrs a day with the pump at 8 hrs also. It’s been at that setting for the last two weeks.

I added liquid chlorine And got my FC levels up about a week ago to 6. Tested today and I am at FC of 3. SWG set at 20. Salt level 3200. It seems my chlorine drops quickly. My pool gets full sun and. Ow the weather is warming here in FL. Any thoughts?

Seems I am getting 10 Different responses here. My SWG only runs during the day. So when I did the overnight test, it was off before and after. FC=1 CC=0 TC=1 CYA=50 (I added CYA last week according to Pool Math) If I am to add liquid chlorine to get levels back up, can you share the formula...

My numbers are the combined FC + TC. I use the TF-100 test kit. CYA is 50

Okay. I did the OCLT. Last nights water TC: 1 This Am’s water was almost 1 ( I say this because 1 drop of my R-0871 just about turned clear. I have my SWGC set at 40 for a week now which has been at 20 since I have had the pool. It seems I can’t get my chlorine up. Any advice. Should I SLAM...

hi all. I have been getting a slight bit of cloudiness to my water. All of my chemistry is in line. I was running a higher TC number since the pool was built about 9 months ago and through the winter. The cloudiness started coming on once the weather warmed, suns out, and chlorine is now around...

There is a sub panel and I’ll be here when they come

It’s sprinkler water stain. Rubs right off. It’s reclaimed water that mists over

I reached out to the builder. They will Have service come out on Monday. Again, if it’s under warranty I want them to handle. But I will surely keep everyone posted

1. I want to Be careful to not void the warranty. 2. How do I check the voltage? I do have a multimeter

Also to note, to turn on or off the heater, it seems to take me holding the button like it doesn’t want to turn off or on.. almost sputters.