Bperry's latest activity

  • B
    Bperry reacted to pool_novice's post in the thread Calcium Hardness Ideal Level with Like Like.
    The 307 CH came from a pool store test. Everything else in the panel I attached was tested by me using a Taylor kit and new reagents I...
  • B
    Bperry replied to the thread How much would it cost to fix it?.
    More than hundreds, depending on the extent is my guess and where you are located.
  • B
    Bperry replied to the thread Calcium Hardness Ideal Level.
    You don’t seem to be testing with a kit that TFP believes is reliable. Be careful trusting whatever you’re using that came up with 307ppm
  • B
    Bperry replied to the thread Wildly Different Test Results?.
    U Upload it to YouTube and post a link. Or just post some pictures.
  • B
    Bperry replied to the thread Wildly Different Test Results?.
    If you have a CC of 4.5ppm I’d question whether you’re doing the test correctly. If it really is 4.5, your pool should be a pretty big...
  • B
    Bperry replied to the thread How much would it cost to fix it?.
    It’s leaking. Depending on how extensive the cracks are and why they happened the cost to fix can be quite a wide range. Letting water...
  • B
    Bperry replied to the thread How to fix these chips?.
    Kinda looks like the deck was a renovation to add stone coping and they just mortared/grouted the face above the tile and below the...
  • B
    Bperry replied to the thread How to fix these chips?.
    More grout. But you’ll probably be patching it again in the future because of the lack of expansion joint.
  • B
    Teflon tape is only used for tapered pipe threads. If the fitting has an oring seal then using tape is not going to do anything except...
  • B
    Bperry reacted to Donldson's post in the thread Sample CYA 50ppm from TFTestKits with Like Like.
    You didn't fail anything, you confirmed your lighting and/or technique was not correct. Mix the standard with the CYA reagent, fill...
  • B
    Bperry replied to the thread Sample CYA 50ppm from TFTestKits.
    Also make sure you’re mixing the 50ppm standard with your reagent in the kit. The standard is not pre-mixed and so it needs the reagent...
  • B
    Bperry replied to the thread Sample CYA 50ppm from TFTestKits.
    Try posting a picture here of the test sample.
  • B
    Bperry reacted to PoolStored's post in the thread SLAM questions with Like Like.
    Likely. Brush and filter. Clean your filter when your filter pressure rises 25% above your clean filter pressure. It'll get it. Keep...
  • B
    Bperry replied to the thread Algae Algae Algae.
    Unfortunately, The photometer is going to do that to you. If the FC isn’t staying up, then it’s being used up fighting algae even though...
  • B
    A well should be contributing zero copper to your pool water. If it is, it’s contaminated and shouldn’t be used anymore. If u you oh...