Recent content by ATONESIR

I am in the middle of my work day and don't have time for Taylor just yet, but I did a quick 50% mix test (pool/tap) with the quick stick and the CYA came in the 30-50 zone, FC 5, pH 7.2, TA 80. For giggles, I ran another quick stick on the remaining pool water and was back at 100 cya, 10 FC...

Yes, the CYA was from the quick sticks as I just wanted to see where the main numbers were. I've battled high CYA in the past (pool came with the house), which is why I switched to liquid chlorine and joined this community/app. I'll run another test when I switch out the robot filters in a...

Thank you for the links to these parts. I was wondering where to get extra little foam crawler rings and spring/fall filters. slightly off-topic: Does anyone run a hybrid filter setup like I do? 2 spring filters on the outsides, and 2 fine filters on the inside?

I am a subscriber to the app and log all activity but have not linked the accounts. The pool opening this spring was cloudy, whereas it's usually very clear. Opening service shocks, bleeds, skims and recharges as usual and pool usually clears up. In these 2 days I have had the first fresh charge...

Thanks for the info. I'll give it a go.

GREAT. So based on my model number, my unit was built AFTER 2011 ? OR do I get that from the SN 1302171179 ?

@ajw22 It seems my model number is P-R4406A-EN-C EDIT: Here is the pertinent info from the online manual for the R406A unit: 4-C -- P.C. Board/Control -- 013464F 7-C -- LCD Display --Units manufactured from 5/2011 -- 013640F Fingers crossed

That makes it easy. Thanks for the help. :cheers:

Thank you. I thought it would be an item that came with the magna latch. I guess something like this would work. Pricey, but I need the safety.

I'll get on it first thing in the AM. They left me the manual, but it doesn't say which model I actually have. Thanks again. I see that pre-post 2011 is the difference between 300 or 35 bucks.

Thanks again @ajw22 It's a bit of an overload having all this unknown equipment to take care of now. Really appreciate it. +1

thanks a bunch @ajw22 -- are there any good videos showing the moving of the switch part? Plopping in a new timer I can handle.

Thanks for the help. Here is the timer with the wiring cover off. Runs and turns on like a champ, but OFF dogs wont turn it off.

@ajw22 Where do I get that information? I posted photos of the board and the lcd. Pool came with the house. I already cleaned the pins and made sure connections were tight. Heats fine, just no display.