Recent content by artie37

Hey guys, i want to give you an update on mine. Things were going smooth with the new belts for a couple weeks until the motor just completely gave out. I ordered a new one on Amazon for $300. Dang thing requires a proprietary torque wrench that costs $300 to torque that white plug the cable...

Thanks for the info! I'll replace the belts. I ran it today and it kept flipping when it tried to climb the walls. It climbed the walls for the first 5 minutes and then stopped after that.

Another question, my tiger shark makes a lot of clicking noises coming from the drive belts. Is that normal? I know that one of the drive belts is really worn out and has a crack in it. How will I know when the bearings be replaced? I took mine apart and all the bearings spun freely so they...

Sorry hear to about your robot. My new filters came in and it climbs the walls now. Those old filters were super old and dirty. Even after cleaning them they were still brown. Unfortunately it stopped again after 15 minutes. It stopped and just kept spinning the impeller. From what I'm reading...

Sorry hear to about your robot. My new filters came in and it climbs the walls now. Those old filters were super old and dirty. Even after cleaning them they were still brown. Unfortunately it stopped again after 15 minutes. It stopped and just kept spinning the impeller. From what I'm reading...

Thank you! I took the sides off to inspect everything and noticed a crack in one of the rubber tracks. All of the rollers seemed to spin freely. I put it back in my pool today and now there is dirt coming out of the impeller. The filters look pretty beat so I'm sure thats a part of it. I will...

My pool water is 60 degrees right now. I tried to run it today and it ran for a 1/2 hour before it stopped climbing the walls. Once the filters start to get dirty, it loses suction. I have new filters on order so hopefully that fixes it. I have no idea how old the filters are as I found my...

Hi Spidey! I'm actually having a similar issue. When I turn it on, it will run through the test cycle. It will spin the impeller and move the tracks. After about 30 seconds, only the impeller will spin and the unit won't move. Sorry I dont have an answer but hopefully someone will be able to...