Recent content by Alphaman

Hi All at TFP, I am building a Perimeter overflow pool in the middle of a "Courtyard House". The pool is being built up from the basement so the pool (water) surface sits at Ground floor level(see attachment pics &drawings) I am not in the US so can't access all the experts on these matters so...

Hi all, For the pool I am building above, what type of floor drain would I need, Concrete one or liner one? I am presuming I will coat the inner concrete shell of pool with a render coat then the liner. So the eye inlets and pool drain will be the for concrete pools or liner pools since the...

I am still no near to getting this off the ground. we're 60% out of foundation and will be pouring the base and side walls to the pool. As you might be aware this is a "Perimeter overflow pool "type with the overflow trough running along 3 sides. No Skimers - The Troughs act as one big Skimmer...

Hi to all at TFP! I am still no near to getting this off the ground. we're 60% out of foundation and will be pouring the base and side walls to the pool. As you might be aware this is a "Perimeter overflow pool "type with the overflow trough running along 3 sides. No Skimers - The Troughs act...

Thanks for all your valuable comments.I am putting this thing together, bit by bit as I want to buy all the plumbing bits out here(London) before returning to Ghana. Do you know what size the "surge tank" need to be? Ok,four inlets (as this is a small pool). I will be putting them in on the...

Hi to all at TFP! I am presently building a pool from the basement upwards(the pool surface is at ground floor, pool structure below an excavated basement) in the centre of a "Courtyard House" , (also under construction),so that the overflow edge is leveled with the courtyard flooring at Ground...