ajw22's latest activity
-
ajw22 replied to the thread CH suddenly low?.Sounds like your water company changed the way they treat your water. -
ajw22 replied to the thread CH suddenly low?.I went from having high CH water in my pool to low CH when the water company improved my house water quality and lowered the CH in it...
-
ajw22 replied to the thread Newly opened pool.Welcome to TFP. What test kit did you use to measure CC of 5.2 and FC of 1. What were the other measurements? pH, TA, CH, CYA? What...
-
ajw22 replied to the thread Help, Please! Pool Plumbing issue..PVC glue cannot cement PVC to rubber. You should use PVC fittings all the way to a PVC return jet. Please post your pictures directly...
-
ajw22 replied to the thread Bad Scaling On Tile Grout and Surfaces.That is Efflorescence - Further Reading from water getting into the spa shell and then coming out at the grout lines. Check for small...
-
ajw22 replied to the thread Repairing waterfall and decking cracks.Your waterfall and deck are cracking from ground movement or winter freeze-thaw cycles. Plaster or concrete will develop cracks in a few...
-
ajw22 replied to the thread Considering Replacing Damaged Deck with Cantilever Deck.Irrigation of the grass along that are keep the soil flexible and adds to the ground movement. It doesn't take any leaks.
-
ajw22 replied to the thread Do I need a regular cover along with a safety cover?.What do you think is a regular cover that you would put over the safety cover? A tarp? How will you hold it down?
-
ajw22 replied to the thread Intellicenter Automation Help Needed.Make sure that the expansion card is fully seated on the connector to the main card.
-
ajw22 replied to the thread Jets not working.I don't see the pipes going in or out of your heater or where they connect to?
-
ajw22 replied to the thread Jets not working.Please show us complete pictures of your equipment pad and all equipment. We need to understand your entire system to try and explain...
-
ajw22 replied to the thread Intellicenter Automation Help Needed.Welcome to TFP. Assign both actuators to your water feature circuit. Show me this page on your system through intellicenter2 . com
-
-
ajw22 replied to the thread Understanding Pentair Intellitouch/Screenlogic Setup.Welcome to TFP. To turn off egg timers set them to 12 hours, not zero. For everything to operate properly, your pool should be running...
-
-
-
ajw22 replied to the thread TF-Pro Salt.It is not. If it is 0 and the % display on the cell has all the LEDs off then it is OFF. Your variance is within normal testing errors...
