Recent content by AHHA

Done :) You saved me a lot of $$ with that.

success!! Thank you!

To clarify - “line in” is wired to the breaker box. “Load out” goes to the pump.

It looks like the wires come in, attach to the pump location, and 2 go to the breakerbox.

I don’t know how to change this. It is wired however the pool guy did it, but I was guessing that was the issue.. I generally turns on when the Omnilogic tells it to and hits relay 5?

That seems to have worked in the menu, but it will not turn the pump on... I went into the configuration menu and edited it to a vsp pump. It still did not show the HUA. I saved it anyway. It restarted and I checked the system info and it was there.. I went back and edited the HUA for the...

I might see my problem.. green and yellow. Oops!

I attached 3 images. Yes, I went through and tried to add it as a vsp pump, but it is not showing the pump under the system info for the msp (?) in order to connect it. I have tried switching it by editing the configuration rather than starting new. I will not control it if it is noted as vsp.

I'm interested in your filter wiring. It is definitely different than how mine was wired.. but I have a pentair vsp.

We have had the Hayward controls for at least 15 years. I just upgraded it to an Omnilogic board. We have a Pentair IntelliFlow pump that was installed a few years ago. Generally, the old board just turned it on and off. With the Omnilogic - sometimes it turns it "on" but the pump is at 0rpm. I...

Thanks! We should have enough lighting and we have the pool closed at dark most of the time anyway - we're also putting in more flood lights outside of the pool to make up for any missing lights. I will have them filled the next time they Replaster, but since they JUST finished and didn't...

I saw the light doctor one - it says for vinyl pools. This is a plaster pool. I've never seen lights like that in a vinyl pool though, so is the description just wrong?

The pool in our neighborhood is old and is being refinished. The lighting is a bit of an issue, but we had most of them replaced with LED lights. 2 have broken wires and we are not willing to dig up the deck to find the issue. They have now sealed the conduit lines so they won't leak. We would...

Thank you HermanTX :)

Thank you HermanTX. that is what I was thinking before meeting with him, but I had heard of it damaging the integrity of the gunite before on forums somewhere. JamesW, we are redoing the tile, but not the coping at this time. I have no idea how many layers of plaster there is. If I were to...