Recent content by Adam.

Hose arrived, perfect replacement. Also spoke to a regional dealer who told me he was having issues getting parts from FAFCO, and in fact recently he received some couplings from them with a green stripe... when I mentioned what I found, he wanted part numbers immediately. Told him, he pulled...

Yeah, its an old thread but the exact thing Im looking for... I will be buying a gates two layer reinforced hose: Rated to 257deg F and 60 psi (Item # 24238) Amazon has it at $50 for a 36 inch piece, I'll get 10 coupings out of it. $5 each, Razor knife or bandsaw to section.... I'll...

Whole pump. Its a new PB4-60 booster pump: https://www.amazon.com/gp/product/B000786GKS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Likely drill some new holes in the concrete to mount it. Maybe glue for the intake as I assume the dimensions will change a bit, the flex off the output is...

Yeah. $264 for the pump.... Ill check out some of the new stuff, havent really kept up since the 380 has worked (although rebuild 4x... ;) )

PB4-60Q Replaced parts over the years. A few o-ring seals..a volute...a ceramic seal. BUT... just found a crack in the 'back' of the volute area... Not the front, which is clamped on...this is on the back side that appears to be part of the motor. On the diagram it is #1. (Crack is around...

Thanks. Check out the date on the rebar pic... 20 years ago! Digging in that 'dirt' was quite a challenge! "Converted" the old paper prints to digital...by laying on the floor and taking a digital picture of it, then formatting, color correcting, etc in Lightroom. Anyway, took a bunch of...

Pictures: The conduit into which the light was installed: End result: Very happy - - - Updated - - - PS Gave up on Hayward Retail support- they never responded to my request for assistance with a DOA controller. Handled it with the retailer. Replacing with a Zwave controlled switch.

Just updating.... The 8.75 worked fine. Actual spec from Jandy is 8.6" to back edge of lens. First pic is an oldie...15 years ago . End result- great coverage both ends (2 x 20W)...the murky deep end with the old fiberstars gone. Deep red color is the darkest, but very happy w the result

An update... Well, went with Hayward ColorLogic LACUS11050 units- two of them. These are 20W LEDs, and are SIGNIIFICANTLY briger than the old Fiberstars unit. The 9.5' deep end of the pool is fully illuminated on almost all colors except the deep reds and purples. Fit perfectly, as mentioned...

As stated above this is not a easy DIY/Homeowner upgrade or retrofit. Nothing is 'plugged in', rather it has to be designed and then hardwired. You need to measure the space in the conduit to first determine what light will fit- the depth is a critical and can dictate the mfg, model and...

Jandy purchased Savi. Recognize that Jandy will not warranty the lights if they are not 'professionally' installed. They will also not provide any warranty support unless you pay a company or 'professional' to come out and do all the work.

I am in the process of installing two Hayward ColorLogic 320 LED lights. They have very similar model number EXCEPT one is networked and one is not: LACUN11xxx and LYCUN11xx both networked LACUS11xxx and LYCUS11xxx both Standalone Double check your numbers- what you ordered AND what you...